Hitachi L26D204 Symptoms Possible Solutions, When a letter string is displayed Check Auto Adjust

Problems and troubleshooting					(continued)
		SYMPTOMS		POSSIBLE SOLUTIONS			PAGE
	PC
	When a letter string is displayed		•	Check “Auto Adjust”.		17
	in full-screen, all of the characters		•	If the condition is not improved with “Auto Adjust”, check “Phase” until you get the
	on the screen are blurred.			clearest image.
	When small patterns are		•	Check “Auto Adjust”.
	displayed on the screen, the		•	If the condition is not improved with “Auto Adjust”, check “Phase” until you get a		17			ENGLISH
	entire screen is flickering.			flicker-free display.
	Image cannot be displayed in the		•	Check the signal status of the PC.				–
	correct position.
DVD
Playback doesn’t start.			•	No disc is inserted.		23
			•	The disc may be dirty. Clean the disc.		9
			•	The unit cannot play CD-ROMs, etc.		9
No picture.			•	TV/DVD selector is not set correctly.		23
No sound.			•	Check the input selector of the amplifier is set properly.				–
			•	The unit is in the Special playback mode.		24
			•	Select the correct Audio Output position on AV amplifier.		34
Picture is distorted during CUE or			•	The picture will be distorted occasionally.				–
REVIEW.
Stopping playback, search,
slow-motion play, repeat play,			•	Some discs may not allow these functions.				–
or program play, etc. cannot be
performed.
No surround sound.			•	The setup does not match your stereo system.		33
The unit or remote operation key			•	Turn off the unit and unplug the AC power cord for several minutes, then replug it.		12
is not functioning.
Playback does not start when the			•	Check the Parental setup.		30
title is selected.
Audio soundtrack and/or subtitle			•	Multilingual language is not recorded on the DVD disc.		25
language is not changed when
you play back a DVD.
No subtitle.			•	Some discs have no subtitles.		25
			• Subtitles are cleared. Press SUBTITLE.
Angle cannot be changed.			•	Multi-angles are not recorded on the DVD disc.		25
“This operation can’t be			•	The function is prohibited with the unit or the disc.		23
performed” appears on the
screen.
If an irregular shaped disc or a			•	Press PLAY and the disc will start playback. Then press EJECT.
disc that has a slippery surface			•	If the disc is not ejected by pressing PLAY and EJECT, partially insert another disc		9
is inserted, the disc may have				(about 1/3 of the disc), then pull out the disc.
problems ejecting.				Note: Do not fully insert the other disc.
REMOTE CONTROL
			•	Aim the remote control at the remote sensor.
The remote control does not			• Operate within Approx. 15 feet or reduce the light in the room.
			•	Clear the path of the beam.		12
function.
			•	The batteries are weak. Replace the batteries.
			•	Check that the batteries are inserted correctly.

FOR CUSTOMER SERVICE, ADDITIONAL SET-UP AND OPERATING ASSISTANCE, OR TO ORDER ACCESSORIES PLEASE CALL:

1-800-289-0981

WHEN CALLING CUSTOMER SERVICE – PLEASE HAVE YOUR MODEL NUMBER READY

OR WRITE TO:

ORION SALES, INC. 3471 N. UNION DR.

OLNEY, ILLINOIS 62450

37

54H0321A_eng.indd 37

5/4/10 3:45:05 PM