Hitachi L26D204 manual Connections to other equipment, To connect the LCD TV/DVD to a VCR

Connections to other equipment

The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs.

To connect the LCD TV/DVD to a VCR

Rear of the unit

To Video/Audio OUT

To LINE 2 VIDEO/

AUDIO IN

Video/Audio cord (not supplied)

VCR

To connect the LCD TV/DVD to a VCR with an S-Video cord

If you connect a VCR with a S-Video cable to the S-VIDEO IN jack on the rear side of the unit, you must also connect the audio cables to the AUDIO IN jacks on the rear side of the unit.

The S-Video cable only carries the video signal. The audio signal is separate.

NOTE:

• When the S-Video cable and the standard video cable are connected at the same time, the S-Video cable takes precedence.

Rear of the unit

VCR

	To Audio OUT
	To LINE 1 AUDIO IN
	To S-Video OUT
To LINE 1	Audio cord (not supplied)
S-VIDEO IN

S-Video cord (not supplied)

To connect to a DVD player with Component Video Input

You can enjoy a high quality picture by connecting the unit’s COMPONENT VIDEO OUT jacks of your DVD player with the COMPONENT video cables (not supplied).

Rear of the unit

Component video cord (not supplied)

Y Pb Pr

To COMPONENT IN

To LINE 2 AUDIO IN

Audio cord (not supplied)

To Component OUT

Y	DVD
Pb
Pr
To Audio OUT

NOTE:

• Component Video input of the unit are for use with a device which output 480i/1080i interlaced signals and 480p/720p progressive signals.

32

54H0321A_eng.indd 32

5/4/10 3:44:58 PM