Program Table
By pressing a / b button, select Program Table. Press ` to display Program Table.
Program Table
|
|
| P11 S 18 | |
| P01 | BBC 1 | ||
| P02 | C 04 | P12 | S 29 |
| P03 | C 05 | P13 | S 31 |
| P04 | BBC 1 | P14 | S 33 |
| P05 | CH 4 | P15 | S 34 |
| P06 | BBC 2 | P16 | S 35 |
| P07 | C 04 | P17 | S 36 |
| P08 | C 07 | P18 | S 37 |
| P09 | C 12 | P19 | S 40 |
| P10 | C 15 | P20 | C 21 |
|
|
|
|
|
Name Insert
Delete APS
By moving the cursor in four directions you can reach 20 programmes in the same page. You can scroll the pages up or down by pressing the navigation buttons to see all the programmes in TV mode (except the AV mode). By cursor action, programme selection is done automatically.
Name
To change the name of a decided programme, select the programme and press the RED button.
The first letter of the selected name will be highlighted. Press a / b button to change that letter and _ / ` button to select the other letters. By pressing the RED button, you can store the name.
Insert
Select the programme which you want to insert by navigation buttons. Press the GREEN button. By navi- gation buttons move the selected programme to the decided programme space and press the GREEN but- ton again.
Delete
To delete a programme, press the YELLOW button. Pressing the YELLOW button again erases the se- lected programme from the programme list, and the programmes below shift one up.
APS (Auto Programming System)
When you press the BLUE button for APS, Auto Pro- gramming System Menu will appear on the screen.
Auto Program
Country
WARNING!
All Prestored Programs
will be deleted
Ok
UKCancel
A.P.S. (Auto Programming System) Country
Press _ / ` button to select your country. If you want to exit from A.P.S. function, press the BLUE button.
When you press OK or RED button for starting APS, all stored programs will be erased and the following screen will be displayed:
APS is running...
UK | 63.75 MHz |
| 6% |
P 03 - C 04 | 63.75 MHz |
|
|
Cancel
Whenever you press the BLUE button, A.P.S. func- tion stops and Program Table appears on the screen.
If you wait until the end of A.P.S., Program Table is displayed with the programmes found and located.
Program
By pressing a / b button, select Program. Press _
/` button to select the program number. You can also enter a number via digit buttons on the remote control. There are 100 program storage between 0 and 99.
Downloaded From