Up to five separate timer events can be set and each is displayed in the Timer screen, showing the event number, the channel to be selected, the start time, end time, date and the mode - whether that event is active (and will be acted on) or not.
TIMER MENU
No Channel Name | Start | End | Date | Mode | ||
1. | ITV 1 | 20:00 | 21:00 12/05/2005 |
|
| |
Active |
| |||||
2. | BBC ONE | 00:00 | 00:00 | 01/01/2005 | Inactive |
|
3. | BBC ONE | 00:00 | 00:00 | 01/01/2005 | Inactive | |
4. | BBC ONE | 00:00 | 00:00 | 01/01/2005 | Inactive | |
5. | BBC ONE | 00:00 | 00:00 | 01/01/2005 | Inactive | |
6. | BBC ONE | 00:00 | 00:00 | 01/01/2005 | Inactive | |
|
|
|
|
|
| |
| Toggle Mode | MENU Exit | SELECT Edit Timer | i More | ||
•To set an event, highlight its mode button using the a / b button and press the OK button to display the timer entry window.
|
|
|
Name: | 3. ITV 1 |
|
Start: | 00:00 |
|
End: | 00:00 |
|
Date: | 03/06/2005 |
|
Mode: | Once | |
|
|
|
•Here the five settings of channel name, start time, end time, date and frequency mode can be set. You can move freely between each setting using the a / b buttons.
•The channel name is set using the _ / ` button to display the channel which broadcasts the programme.
•The start time, end time and date are each set with the digit buttons on the remote control in
•The frequency mode determines how often the receiver operates this event and is set with the _ / ` button to be either Once, Daily, or Weekly.
If an invalid number for the start or end times or the date is entered, “Entered time is not valid” message appears on the menu.
If timer action occurs while the TV is watched, the TV switches to the selected channel. When timer ex- pires, the TV switches to the channel which it is switched from.
Selected digital channel will be output via
Recording From IDTV
Connect your VCR to
Set the
Set the time as described above.
Set your TV to standby using the remote control.
Set your VCR to correspond with the time set on your TV and select external input (refer to your VCR in- struction book).
NB. If you switch on your TV whilst the timer record- ing is active and then switch back to standby, the timer recording will be cancelled; the timer setting will be deleted and the desired programme will not be recorded.
Language
Some programmes are broadcast in two or more lan- guages simultaneously. The language heard can be selected from the Language Menu.
•Press the 
button to display the Main Menu and use a/ bbutton to highlight the Language line and press the OK button.
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
•Use the a / b button to highlight the soundtrack language required and press the OK button. Normal viewing, with the required language soundtrack, can be resumed by pressing the 
button.
Languages
English
Downloaded From