Other Features
TV Status
Programme Number, Programme Name, Sound Indicator and Zoom Mode are displayed on the screen when a new programme is entered.
Mute Indicator
It is placed in the upper side of the screen when enabled.
Mute
To cancel mute, there are two alternatives; the first
one is pressing the 
button and the second one is increasing the volume level.
PIP and PAP Modes
PIP picture is displayed on the screen by pressing
button . At PIP Mode, a small picture (PIP picture) is displayed in the main picture.
When PIP Mode is entered, the default active window is PIP window and the active window is indicated by a red frame around it. The active window can be changed by pressing _ / ` buttons.
PIP position can be changed by pressing a / b but- tons.
When 
button is pressed again, the TV switches to PAP mode. In PAP Mode, two pictures with equal sizes are displayed on the screen. Aspect Ratios of the windows are fixed.
When you switch to PAP Mode, main window in PAP Mode is displayed on the right side of the screen. The active window can be changed by pressing _ / ` button.
Press the 
button again to exit the PAP mode.
Note: When main picture source is TV,
AV Modes
You can switch your TV to AV modes by using re- lated buttons on the remote control.
First, press 
button till INPUT OSD is displayed on the screen. You can then use; AV1, AV2, AV3, AV4, AV5, HDMI1 or HDMI2 buttons on your remote control to select the desired source (except being in teletext).
Note that in PIP/PAP modes, pressing 
button will directly change sources.
Zoom Modes
Zoom mode can be changed by pressing the 
button. You can change the screen size according to the picture aspect ratio. Select the optimum one from the following ZOOM modes.
Note:
•In YPBPR and HDMI modes, while in
•In PC mode, only 4:3 and 16:9 modes are available.
Auto
When a WSS (Wide Screen Signalling) signal, which shows the aspect ratio of the picture, is in- cluded in the broadcast signal or the signal from an external device, the TV automatically changes the ZOOM mode according to the WSS signal.
•When the AUTO mode does not function correctly due to poor WSS signal quality or when you want to change the ZOOM mode, change to another ZOOM mode manually.
Zoom
This uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the wide TV screen.
•For 16:9 aspect ratio pictures that have been squeezed into a normal picture (4:3 aspect ratio), use the Full mode to restore the picture to its original shape.
Cinema
This zooms up the wide picture (16:9 aspect ratio) to the full screen.
16:9 Zoom
This zooms up the wide picture (16:9 aspect ratio) to the full screen.
Downloaded From