Hitachi L26D205 important safety instructions CC advanced, Aspect Switching

Select “Setup”, then press ▶ or ENTER.

CC advanced

When you have selected Custom as the display method, you can adjust the various setting listed below as follows:

This feature is designed to customize Digital Captions only.

1

2	Press ▲ or ▼ to select “Closed Captions”, then press ▶ or
	ENTER.
3	The Closed Captions menu will appear.
	Press ◀ or ▶ to set “CC Display” to “On”.

	Press ▲ or ▼ to select “Digital CC Preset”, then press ◀ or ▶
4 to select “Custom”.
5	Press ▲ or ▼ to select “CC Advanced”, then press ▶ or
	ENTER.
	The CC Advanced menu will appear.

	Press ▲ or ▼ to select the desired item, then press ◀ or ▶ to
6 change the setting.
		CC Advanced
		Text Size		Auto
		Text Type		Auto
		Text Edge		Auto
		Text Color		Auto
		Text Opacity		Auto
		Background Color		Auto
		Background Opacity		Auto
		:Move	:Adjust

You can select from among the following items and parameters.

	Text Size:	Auto, Small, Standard, Large
	Text Type:	Auto, Style1, Style2, Style3, Style4, Style5,
	Text Edge:	Style6, Style7
		Auto, None, Raised, Depressed, Uniform, Left
	Text Color:	Shadow, Right Shadow
		Auto, Black, White, Red, Green, Blue, Yellow,
	Text Opacity:	Magenta, Cyan
		Auto, Solid, Transparent, Translucent,
	Background	Flashing
		Auto, Black, White, Red, Green, Blue, Yellow,
	Color:	Magenta, Cyan
	Background	Auto, Solid, Transparent, Translucent,
	Opacity:	Flashing
NOTE:
•	You cannot set both “Text Color” and “Background Color” as a
•	same color.
	You cannot set both “Text Opacity” and “Background Opacity” to
	“Transparent”.

Aspect Switching

You can display the image at its optimum condition by selecting display aspect.

Selecting the picture format aspect ratio

1	Select “Video”, then press ▶ or ENTER.
	Press ▲ or ▼ to select “Aspect”, then press ▶ or ENTER

2 to display Aspect. Press ▲ or ▼ or corresponding Number buttons (0-4)to select the desired picture format aspect ratio, as described below.

Aspect

0.Natural 1.Cinema Wide1 2.Cinema Wide2 3.Cinema Wide3

4.Full

[0-4] :Select

NOTE:

• Selectable picture format aspect ratios may vary depending on the input source or broadcast signal.

• Aspect menu also can be displayed by pressing ASPECT on the remote control.

Natural

In some cases, this image will display the size of standard 4:3 with a black side bar.

	ENGLISH
Cinema Wide1 (for 4:3 format programs)
To fill the screen, the right and left edges are extended. However,
the center of the picture remains near its former ratio.
The top and bottom edges of the picture may be hidden.

Cinema Wide2 (for letter box programs)

The entire picture is uniformly enlarged-it is stretched the same amount both wider and taller (retains its original proportion). The top and bottom edges of the picture may be hidden.

Cinema Wide3 (for letter box programs with subtitles) To fill the width of the screen, it is extended horizontally. However, it is only slightly extended at the top and the bottom.

The top and bottom edges of the picture may be hidden.

A B C D E F G A B C D E F G

Full (for 16:9 source programs)

Full will display the picture at the maximum size.

Native (for PC mode only)

Detects the resolution of the signal of the image and it will be shown on the screen with same amount of pixels.

NOTE:

• Some High Definition and/or Digital broadcasts may not allow you to change the picture format aspect ratio.

• In HDMI or COMPONENT mode with a scanning rate of 720p, 1080i or 1080p (only HDMI), only the Cinema Wide2 and Full are available.

• In PC mode, only the Natural, Full and Native are available. In PC mode (WXGA), only the Full and Native are available.

23

56P5021A_eng.indd 23

5/21/11 3:21:40 PM