Uniden 2.4 Call was placed through a switchboard, Not work Message signaling, Troubleshooting

Symptom	Suggestion
	• Keep the handset away from microwave ovens, computers, remote control toys,
Severe noise interference.	wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights,
	and electrical appliances.
	• Move to another location or turn off the source of interference.
	• The handset was picked up before the second ring.
The Caller ID does not display.	• The call was placed through a switchboard.
	• Call your local telephone company to verify your Caller ID service is current.
Voice Message Indication does	• Contact your local telephone company to make sure that your telephone receives FSK or SDT
not work.	message signaling.
You cannot register the handset	• Charge the battery pack for 15-20 hours.
	• Remove the base ID (see "Replacing the Base Setting" on page 27) and register the handset
at the base.	(see "Register the Handset to the Base" on page 50).
The handset doesn't	• Remove the base ID (see "Replacing the Base Setting" on page 27) and register the handset
communicate with the	(see "Register the Handset to the Base" on page 50).
other handsets.	• Make sure that you have registered all handsets.
An extra handset can't join	• Make sure there are not 2 handsets already using the 3-way conference feature.
the conversation.
You cannot make an intercom	• Make sure that the receiving handset is not in use.
call with another handset.
If you still have a problem.	• Call our customer hotline at 1-800-297-1023.

[ 5 8 ] T R O U B L E S H O O T I N G w w w . u n i d e n . c o m