Uniden 2.4 manual Connect the base unit

note

•Use only the supplied [AD-800] AC adapter. Do not use any other AC adapter.

•Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard.

C. Connect the base unit

1) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet.

2) Set the base on a desk or tabletop, and place the handset in the base unit.

3) Make sure that the charge LED illuminates.

If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the base charging contacts.

•Connect the AC adapter to a continuous power supply. •Place the base unit close to the AC outlet so that you can

unplug the AC adapter easily.

•After installing the battery pack in the handset, charge your handset at least 15-20 hours before plugging into the phone line.

4) Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and to a telephone outlet.

If your telephone outlet isn't modular, contact your telephone company for assistance.

[ 1 4 ] G E T T I N G S T A R T E D w w w . u n i d e n . c o m