Uniden 2.4 manual Global Setup, System Reset

Global Setup

If you change one of the Global settings, you change the setting for all additional handsets. Only one handset can change Global settings at a time.

Submenu option	Description
Day & time	Set the day and time of your display (see page 25).
CIDCW (Default is	Set the Caller ID on Call Waiting (CIDCW) setting. CIDCW performs the same as
	regular Caller ID on a call waiting number (see page 25). Call Waiting Deluxe
CW on/CWDX off)
	allows you to handle call waiting calls in seven different ways (see page 48).
	Store or edit the area code. If you enter a 3-digit area code number in the"Area
	Code" option, your local area code does not appear in the Caller ID message. For
Area Code	calls received from outside your local area code, you will see a full 10-digit number
	(see page 25).
	Note: If your calling area requires 10-digit dialing, do not program this option.
Dial Mode	Set the dial mode to tone or pulse (see page 26). Most phone systems use tone
	dialing, which send DTMF tone through phone line. The default is tone dialing.
(Default is tone)
	Depends on your dialing system, set the dial mode.
Copy Phonebook	Allow you to transfer the phonebook data stored in one handset to another
	handset (see page 26).
Voice Mail Tone	If your service does not support SDT message signal, set your VMWI (Visual Message
(Default is on)	Waiting Inculcator) not to detect SDT message signal (see page 27).

System Reset

System Reset is used to clear the handset's ID from the main base unit, or the base ID from the handset.

	Submenu option	Description
	Deregister HS	Clear the handset ID from the base. Use this option, for example, when you
		change the digital security code (see page 27).
		Clear the base ID. Use this option, for example, if you wish to deregister the base
	Replacing Base	to use the handset with another base of the DSS series (DCT646/DCT6465/DCT648/
		DCT6485 series) (see page 27).
[ 2 0 ] G E T T I N G S T A R T E D		w w w . u n i d e n . c o m