Part IV

Sequencer

Easy Record

Suppose you are playing your instrument and you wish to record and play back your performance to hear how it sounds. You can bypass the set-up procedures of the full-scale sequencer and begin recording quickly and easily.

Note that by executing EASY REC, the original data in the selected song number is erased.

Recording procedure

1.Press the EASY REC button to turn it on.

SEQUENCER

PLAY EASY REC

CHORD STEP REC

The display changes to the following.

4.Press the OK button.

The display changes to the REALTIME RECORD display.

5.Play the keyboard.

Recording begins as soon as you start the rhythm or play the keyboard.

For a performance using rhythm, be sure to press the START/STOP button or the ENDING button to end your performance.

2.Use the SONG and buttons to select the

song number in which to record (1 to 10).

If you press the NAMING button, you can assign a name to your song. (Refer to page 69.)

6.When you have finished recording, press the

EASY REC button to turn it off.

The PLAY button turns on.

Playback

1.Press the SEQUENCER RESET (FILL IN 1) button.

FILL IN

1

SEQUENCER

RESET

3.Set the desired sounds, effects, rhythms, etc.

2. Press the START/STOP button.

Your recorded performance is played back automatically.

When you are finished playing back your performance, press the SEQUENCER PLAY button to turn it off.

Realtime Record

With REALTIME RECORD, your performance is recorded with the timing exactly as you played it on the keyboard. Use this mode to record your performance in up to 16 tracks and create your own orchestra or band.

Recording procedure

1. Press the PROGRAM MENUS button to turn

When you press the PANEL WRITE button, the PANEL

it on.

WRITE display appears. To store the currently active

settings, such as the sounds, at the beginning of the song,

The display changes to the following.

press the OK button.

 

 

3. Use the SONG and buttons to select a

 

song number in which to record. (The song

 

number is shown on the display.)

 

4. Select RECORD & EDIT.

 

The display looks similar to the following.

2. Select SEQUENCER.

 

The display looks similar to the following.

 

5. Select REALTIME RECORD.

65

Sequencer

QQTG0665

Page 65
Image 65
Technics sx-PR804/M, sx-PR604/M operating instructions Easy Record, Realtime Record, Recording procedure, Playback