Part II

Playing the rhythm

Recall the panel setup

1.Press the BANK VIEW button to turn it on. Select a bank.

2.Press the desired PANEL MEMORY number

button (1 to 8).

The panel setup changes to the one stored in the specified memory.

You can then change the sound settings, etc. manually; however, the contents of the memory remain unchanged until you store them again.

The “Control Preset” bank of the PIANO PERFORMANCE PADS (PR804), the soft pedal, or the sostenuto pedal can also be used to change from one PANEL MEMORY setup to another.

The currently selected bank, memory number and memory name are shown in the top line on the normal display.

NEXT BANK

You can press the NEXT BANK button to switch to the next bank. This allows you to change banks without exiting the normal display.

SET

NEXT BANK BANK VIEW

Each time the NEXT BANK button is pressed, the bank changes in order from A to B to C. Following bank C, the bank changes to A.

The panel settings change when a PANEL MEMORY number button (1 to 8) is pressed.

PANEL MEMORY mode

You can define which panel settings are recalled when the PANEL MEMORY is used.

1.Press and hold the SET button for a few sec-

onds.

The display changes to the following.

2.Select the mode.

NORMAL:

The sounds and volume balance, and CONDUCTOR sta- tus are stored.

EXPAND:

All the instrument’s settings are stored, including the rhythm (except for SOUND ARRANGER on/off status), TRANSPOSE, tempo, etc.

After a few seconds, the display exits the setting mode.

EXPAND MODE FILTER

You can specify which data is stored in the EXPAND mode.

1.Use the PAGE buttons to access the PAGE

2/2 EXPAND MODE FILTER display.

The display looks similar to the following.

Playing the rhythm

2.Use the and buttons to select the item.

3.Use the ON and OFF buttons to store the on or off status for the selected item.

56

QQTG0665

Page 56
Image 56
Technics sx-PR604/M, sx-PR804/M Recall the panel setup, Panel Memory mode, Next Bank, Expand Mode Filter