Part XI

Customize

Display Time Out

Numerous message displays and setting displays conveniently guide you through the operation steps of this instrument. Once you become familiar with the operation of your instrument, however, you may wish to shorten or even suspend the display time of the message displays.

Customize

1.On the CUSTOMIZE MENU display, select

DISPLAY TIME OUT.

The display looks similar to the following.

2.Use the DISPLAY TYPE and buttons to select the function.

SAVE REMINDER:

Reminder display (OFF, DEFAULT, HOLD, 1 to 10 sec)

‘COMPLETED’ MESSAGE:

Operation successfully completed (OFF, DEFAULT, HOLD, 1 to 10 sec)

ARE YOU SURE?:

Display requires user action for confirmation (OFF, DE-

FAULT, HOLD)

ERROR MESSAGE:

Error notification display (DEFAULT, HOLD, 1 to 10 sec)

SOUND/RHYTHM SELECT:

Sound/rhythm and PIANO PERFORMANCE PADS (PR804) BANK selection display (DEFAULT, HOLD, 1 to 10 sec)

EASY SETTING:

Display time when the setting display was accessed pressing and holding a panel button (DEFAULT, HOLD, 1 to 10 sec)

When set the OFF, the display will not appear.

When set to DEFAULT, the display time returns to the initialized setting.

You can specify 1 to 10 seconds for the display time.

When set to HOLD, the DISPLAY HOLD automatically turns on.

3.Use the TIME and buttons to change the setting.

4.Press the OK button.

Some messages may be displayed even if they are set to OFF.

Data Protection

Data which you don’t want to change but which is normally overwritten during disk load, song change, or the automatic setting functions, etc. can be protected from accidental overwriting.

1.In the CUSTOMIZE MENU display, select

DATA PROTECTION.

The display looks similar to the following.

2.Use the ITEM and buttons to select an item.

3.Use the ON/OFF button to select ON or OFF.

ON: The data is protected and will not be changed.

OFF: The data is not retained.

4.Repeat steps 2 and 3 for each item.

5.Press the OK button.

123

QQTG0665

Page 123
Image 123
Technics sx-PR804/M, sx-PR604/M operating instructions Display Time Out, Data Protection, Display Time OUT