Part IX

Sound Edit

ENVELOPE TOUCH & KEY FOLLOW

Specify how the volume changes relative to touch or note pitch over time.

1.Use the PAGE buttons to view the 3/3 display.

3.Use the TOUCH and buttons to change

the touch settings.

Use the ATK and buttons to specify the ATTACK time change depending on touch. Use the DCY and buttons to specify the DECAY time change depending on touch.

At a – setting, the softer the keys are pressed, the greater the change. At a + setting, the harder the keys are pressed, the greater the change.

2. Use the buttons to the left of the display to

4. Change

the key follow

settings for the

AT-

TACK, DECAY and RELEASE.

 

select a tone.

 

Use the

and buttons

corresponding to the

EN-

VELOPE KEY FOLLOW attributes to adjust the settings.

Use the RANGE buttons to specify the keyboard range.

LFO Edit

LFO can be applied to the pitch, amplitude, filter and/or pan to produce a cyclic modulation of the sound.

Twelve LFO groups can be used.

LFO

1.On the SOUND EDIT MENU display, select

LFO.

The display looks similar to the following.

2.Use the PAGE buttons to select the respective

characteristics.

PAGE 1/4: PITCH (vibrato effect)

PAGE 2/4: AMP (tremolo effect)

PAGE 3/4: FILTER (wah-wah effect)

PAGE 4/4: PAN (auto pan effect)

3.Use the buttons to the left of the display to select a tone.

4.Use the LFO SETTINGS and buttons to

adjust the respective assigned LFO’s.

LFO which share the same number on other displays are also changed with this adjustment.

SELECT

Select the assigned LFO number (1 to 12)

SPEED

Adjust the modulation speed.

KEYSYNC

When playing more than one note, specify whether the LFO starts or not each time a key is pressed (ON/OFF).

When KEYSYNC is set to ON: if, while playing one note, you play a second note, the LFO is applied to the second note as well.

PHASE

Degree of phase change.

5.Use the CONNECTION ON/OFF buttons to specify whether or not the LFO is applied to

the tone.

An arrow mark indicates that the LFO is applied.

6.Use the TONE SETTINGS and buttons to adjust the respective parameters.

PHASE

Phase

A + indicates normal phase, and a - indicates an inverted phase.

WAVE

Modulate the waveform.

SIN: Sine wave

TRI: Triangle wave

SQR: Square wave

SAW: Saw tooth wave

DELAY

Delay time is the time elapsed from when the keyboard key is pressed until the modulation begins.

DEPTH

Modulation depth

TOUCH

Degree of modulation change in relation to touch

7.Repeat steps 2 to 6 for the other tones, as

desired.

You can press the OVERVIEW button to confirm the status of each LFO setting.

117

Sound Edit

QQTG0665

Page 117
Image 117
Technics sx-PR804/M, sx-PR604/M operating instructions LFO Edit, Lfo