Part V

Composer

Part Setting

You can make detailed settings for each part.

1.On the REALTIME RECORDING display,

press the PART SETTING button.

The settings comprise three pages of the display. Use the PAGE buttons to switch pages.

2.Use the PART and buttons to select a part.

3.Use the and buttons to set the correspond- ing item.

<PAGE 1>

PITCH POINT:

The pitch at which the pattern progression sound is lowered by one octave.

When the root note of the specified chord is higher than the set pitch point, the pitch of that part is automatically lowered by one octave, thus avoiding an unnaturally high accompaniment pitch.

This is effective only for the part for which the Melody group was selected in CHORD MODIFY CHANGE.

SOUND:

Use the panel buttons to select the sound.

DIGI EFF:

Set the DIGITAL EFFECT to on or off.

(SOUND) is the initialized setting of the sound.

BALANCE:

Adjust the volume balance. PAN:

Adjust the stereo balance of each part (LEFT 64 – CEN- TER – RIGHT 63).

At “LEFT 64”, the sound is all the way to the left, at “RIGHT 63” all the way to the right. The center point is CENTER.

BEND RANGE:

Adjust the range of pitch change when PITCH BEND data is received (0 to 12).

<PAGE 2>

EQ-Hi:

Sound correction in the high range.

Use the FC and buttons to adjust the standard

and buttons to set the ratiofrequency. Use the GAIN

of change. EQ-Low:

Sound correction in the low range.

Use the FC and buttons to adjust the standard

and buttons to set the ratiofrequency. Use the GAIN

of change. REV:

Depth of the REVERB (0 to 127).

CHO:

Depth of the CHORUS (0 to 127).

Composer

Playback

1.In the RHYTHM GROUP section, press the MEMORY button.

 

 

RHYTHM GROUP

 

 

8&16

ROCK & POP

BALLAD

JAZZ & SWING

MOVIE &

METRONOME

BEAT

SHOW

SOUL &

GOSPEL &

COUNTRY &

MARCH &

LATIN &

MEMORY

DISCO

BLUES

WESTERN

WALTZ

WORLD

LOAD

The display looks similar to the following.

2.Select the desired memory (A/B/C).

3.Use the VARIATION buttons to select a var- iation.

4.Press the START/STOP button.

The DRUMS part begins to play back.

The BASS and ACCOMP parts are played back when you use the AUTO PLAY CHORD.

89

QQTG0665

Page 89
Image 89
Technics sx-PR804/M, sx-PR604/M operating instructions Part Setting, Playback, Rhythm Group section, press the Memory button