Part XI

Customize

MIDI Setting Load Option

Specify how MIDI data is handled when data is loaded from a disk.

Customize

1.On the CUSTOMIZE MENU display, select

MIDI SETTING LOAD OPTION.

The display looks similar to the following.

2.Use the and buttons to select an item.

Load MIDI Parameters?

From Registration file:

Specify whether MIDI data is also loaded when panel data is loaded (NO/YES).

From Sequencer Song:

Specify whether MIDI data is loaded or changed when SEQUENCER data is loaded or when the SONG is changed by the SEQUENCER SONG SELECT, SONG COPY or TRACK ASSIGN (NO/YES).

The MIDI settings are always stored at the start of each recorded SEQUENCER SONG and when PANEL WRITE is executed. In the initialized state, the MIDI settings are not loaded even when the SONG is changed. However, changing this setting to YES will cause the stored MIDI settings to also load in these cases.

Use these settings when:

GM2 mode ON:

Specify how the MIDI settings of this instrument are af- fected when GM2 is on.

Select from INITIAL, (initialized settings), PRESET (MIDI PRESETS), and KEEP (the settings do not change).

NX SOUND mode ON:

Specify how the MIDI settings of this instrument are af- fected when NX SOUND is ON.

Select from INITIAL, (initialized settings), PRESET (MIDI PRESETS), and KEEP (the settings do not change).

3.Use the and buttons to change the setting.

4.Press the OK button.

Video Out Mode Setting (PR804)

Select the output mode for the VIDEO OUT terminal when viewing display images, such as SLIDE SHOW or lyrics, on your external video monitor or TV.

1.On the CUSTOMIZE MENU display, select

VIDEO OUT MODE SETTING.

The display looks similar to the following.

2.Select PAL or NTSC.

This setting is kept even after the power is turned off.

124

QQTG0665

Page 124
Image 124
Technics sx-PR604/M Midi Setting Load Option, Video Out Mode Setting PR804, Load Midi Parameters?, Use these settings when