Part XII

MIDI

Part Setting

Follow this procedure to set the functions which can be set for each part: MIDI CHANNELs, the OCTAVE data to NOTE data during transmission, and LOCAL CONTROL (whether or not the sound generator of this instrument is active during transmission).

MIDI

1.On the MIDI MENU display, select PART SET-

TING.

The display looks similar to the following.

2.Use the PART and buttons to select a

part.

The list of parts covers 4 pages. Use the OTHER PARTS/TR button or PAGE button to view different parts.

3.Use the CHANNEL and buttons to select

a MIDI CHANNEL for the part (OFF, 1 to 16).

A part which has been set to OFF cannot be used to transmit or receive MIDI data.

The initialized settings are as follows:

RIGHT 1

1

 

 

RIGHT 2

2

 

 

LEFT

3

 

 

PART 1

OFF

 

 

PART 2

OFF

 

 

PART 3

OFF

 

 

PART 4

4

 

 

PART 5

5

 

 

PART 6

6

 

 

PART 7

7

 

 

PART 8

8

 

 

PART 9

9

 

 

PART 10

10

 

 

PART 11

11

 

 

PART 12

12

 

 

PART 13

13

 

 

PART 14

14

 

 

PART 15

15

 

 

PART 16

16

 

 

CONTROL

OFF

 

 

ACCOMP 1 – 5

OFF

 

 

BASS

OFF

 

 

DRUMS 1 – 2

OFF

 

 

CHORD

OFF

 

 

4.Use the OCTAVE and buttons to set the

octave shift value (–3 to 3).

Octave shift is set for transmitted data only; however the transmitted and received octave shifts are linked. For example, if the transmitted octave shift is set to 1, the received octave shift is automatically set to –1.

5.Use the LOCAL ON and OFF buttons to enable

or disable this instrument’s sound generator.

When set to ON, the performance from this instrument is transmitted as MIDI data and also sounds from this in- strument. When set to OFF, the performance from this instrument is transmitted as MIDI data but does not sound from this instrument.

6. Repeat steps 2 to 5 for each part as desired.

128

QQTG0665

Page 128
Image 128
Technics sx-PR604/M, sx-PR804/M On the Midi Menu display, select Part SET, Ting, Use the Part and buttons to select a