MIDI

Part XII

MIDI

Computer Connection

These settings are used to select the mode related to MIDI signal flow when a personal computer is connected to the USB terminal of this instrument.

When connecting to a personal computer, install the USB driver on the included CD-ROM to the computer first. (Refer to the separate manual for more information.)

1.Turn off the power to this instrument.

2.Connect a personal computer to the USB ter- minal on the rear of this instrument.

3.Turn on the power to this instrument.

4.On the MIDI MENU display, select COM-

PUTER CONNECTION.

The display looks similar to the following.

5.Use the and buttons to select a mode.

NORMAL:

Ordinary mode

PC as master:

The mode which is appropriate for data transmission

PR as master:

The mode when this instrument is used as the master keyboard.

PR as slave:

The mode when this instrument is used as a slave instru- ment.

INTERFACE:

The mode when this instrument is used as a connecting device between a PC with only USB terminals and an in- strument with only MIDI terminals.

134

QQTG0665

Page 134
Image 134
Technics sx-PR604/M, sx-PR804/M Computer Connection, Puter Connection, Use the ∧ and ∨ buttons to select a mode, Interface