Technics sx-PR804/M, sx-PR604/M Initialize, Power on settings, Select Initial, Pedal Setting

Initialize

This instrument has many settable functions and storable memories. However, you can return the settings and memory to the factory-preset status.

INITIAL

1. Press the PROGRAM MENUS button to turn	4. Use the ▲ and ▼ buttons to select the desired
it on.	type of initialization.
	• PERFORMANCE includes all the items which are listed
PROGRAM	below it.
MENUS

•The display changes to the following.

2. Select CONTROL. (PR804)

•The display looks similar to the following.

3.Select INITIAL.

• This display changes to the following.

5.Press the OK button.

•The display changes to the confirmation display. Press the YES button if you wish to execute the initialization. Press the NO button if you wish to cancel the procedure.

•Initialization begins. When initialization is completed, “COMPLETED!” is shown on the display and this instru- ment returns to the normal performance mode.

•The MIDI & FAVORITES are not initialized by this proce- dure.

You can also reset all the PERFORMANCE items with the following procedure:

Turn off the power to this instrument once. Then, while pressing the three lower left buttons in the RHYTHM GROUP section (SOUL & DISCO, GOSPEL & BLUES and COUNTRY & WESTERN) at the same time, turn the power on again.

(PR804)

Power on settings

When the POWER button of this instrument is turned on, the settings below are automatically set to those suitable for piano performance.

Sound	GRAND PIANO (CONCERT)
CONDUCTOR	RIGHT 1
TRANSPOSE	C
R1/R2 OCTAVE	Off
SYNCHRO START	Off
AUTO PLAY CHORD	Off
All PART SETTING items for the RIGHT 1 part	Appropriate values
PEDAL SETTING	Left: SOFT

Center: SOSTENUTO

•When you turn the power on, you can recall all the settings which were in effect at the time you turned the instrument off: while depressing the sustain (right) pedal, turn on the power.

135

QQTG0665