Technics sx-PR604/M Copy and paste the recorded data, Select the function, Song Copy, Track Copy

Part IV Sequencer

Copy and paste the recorded data

You can copy and paste specific portions of the recorded data.

Select the function

1.On the SEQ MENU display, use the SONG ∧ and ∨ buttons to select the number of the

song. Then select COPY & PASTE.

• The display looks similar to the following.

2.On the COPY & PASTE display, select a func- tion.

3.Perform the editing procedures. (See below.)

•During the editing procedure, if the indicator for the TEMPO/PROGRAM is lit, you can use the TEMPO/PRO- GRAM for the editing function.

SONG COPY

Copy all the recording data of a song to a specific song memory.

1.On the FROM side, use the ∧ and ∨ buttons to select the song number you wish to copy from.

2.On the TO side, use the ∧ and ∨ buttons to select the song number to copy to.

3.Press the OK button.

•The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function.

TRACK COPY

Copy the recorded data from specific tracks of a song.

1. Specify the track you wish to copy from.

• On the FROM side, use the SONG ∧ and ∨ buttons and TRACK ∧ and ∨ buttons to specify a track.

• If ALL is selected, all the tracks of the specified song number will be copied.

2.Specify the track you wish to copy to (TO side).

3.Press the OK button.

•The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function.

•The track assignment settings are also copied. Note that in some cases, the CONTROL, RHYTHM and CHORD part data in the destination tracks may be lost.

Sequencer

TRACK MERGE

Merge the recorded contents of two tracks (source tracks) and store the merged contents in a third track (destination track).

•When the TRACK MERGE function is executed, the data is erased from the two source tracks.

1. Select the two source tracks (FROM).

• On the FROM side, use the TRACK ∧ and ∨ buttons to select the two source tracks.

• You cannot select the track to which the CONTROL, RHYTHM or CHORD part has been assigned.

• If the part assigned to the left source track (“left” meaning its position on the TRACK MERGE display) is different from the part assigned to the right source track, when the parts are merged in the destination track, the new track is assigned the same part as the left track.

2. Select the destination track (TO).

• Use the TRACK ∧ and ∨ buttons to the right of the display to specify the track number.

3.Press the OK button.

•The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function.

80

QQTG0665