Technics sx-PR804/M, sx-PR604/M Tone Edit, About tones, Tone Select, Easy Edit items

Part IX Sound Edit

Easy Edit

The most commonly used edit functions are consolidated on one display, providing convenient and quick editing operation.

1.On the SOUND EDIT menu display, select

EASY EDIT.

•The display changes to the following.

2 Use the buttons below the display to specify the value of the attribute.

•An effect may remain unchanged when EASY EDIT is used to set the value, if another EDIT function was first used to set the value to its upper or lower limit.

3.Press the WRITE button to store your new

sound.

•Storing your new sound is explained on page 119.

•If a sound is stored in the EASY EDIT mode, and is later selected in the EASY EDIT mode, the displayed value of an attribute may be different from the value when it was stored. The sound itself, however, is exactly as it was stored.

Easy Edit items

BRILLIANCE:

Adjust the brightness of the sound.

VIBRATO DEPTH:

Set vibrato depth.

VIBRATO SPEED:

Set vibrato speed.

VIBRATO DELAY:

Set time delay between key played and vibrato start.

OCT SHIFT:

Shift the octave range.

ATTACK:

Adjust attack time.

RELEASE:

Adjust time of sound fade-out after key is released.

DIG.EFFECT:

Select type of effect. (Refer to page 118.)

Tone Edit

Modify the separate tones which comprise the sound.

About tones

A sound may be made up of at most four tones.

1st tone

2nd tone

SOUND

3rd tone

4th tone

•A special process is used to produce real-sounding piano type tones. For this reason, some edit procedures for piano sounds, FILTER or AMPLITUDE for example, may differ from those for other sounds.

TONE SELECT

1.On the SOUND EDIT menu, select TONE.

•The display looks similar to the following.

2.Use the buttons to the left of the display to select the tone you wish to edit (1st, 2nd, 3rd,

4th).

•Use the ON/OFF buttons to select ON or OFF.

3. Select a sound for the tone.

• Use the GROUP ∧ and ∨ buttons to select the group, and the TONE NAME ∧ and ∨ buttons to select the sound.

• A “*” mark in the TONE DYNAM column indicates that a TONE DYNAMICS change was made to the sound.

4.Use the LEVEL ∧ and ∨ buttons to adjust the volume.

5.Use the KEY ∧ and ∨ buttons to set the pitch of the output sound.

111

Sound Edit

QQTG0665