Control Messages, Realtime Messages | Technics sx-PR804/M guide

Part XIIMIDI

Control Messages

Enable or disable the exchange of various control data.

1. On the MIDI MENU display, select CONTROL	4. Repeat steps 1 and 2 for each control as
MESSAGES.	desired.

•The display looks similar to the following.

•The CONTROL MESSAGES display consists of 3 pages. Use the PAGE buttons to switch between pages.

MIDI

2.Use the MESSAGE ▲ and ▼ buttons to select the control message.

3.Use the OFF/ON buttons to specify on or off for the control message.

ON: Data for the control operation is exchanged.

OFF: Data for the control operation is not exchanged.

•The BANK SELECT setting is effective only when PRG. CHANGE is set to ON.

•The EFFECT & REVERB setting controls the DIGITAL EFFECT, CHORUS, MULTI EFFECT and REVERB on/off.

•RPN is the general term for KEY SHIFT, TUNING, PITCH BEND RANGE and MODULATION SENSITIVITY.

Realtime Messages

Enable or disable the exchange of START/STOP data (REALTIME COMMANDS), and select the CLOCK mode.

1.On the MIDI MENU display, select REALTIME

MESSAGES.

•The display looks similar to the following.

2.Use the buttons on the left side of the display to select a function.

3.Use the ∧ and ∨ buttons to change the setting.

REALTIME COMMANDS

ON: Rhythm and SEQUENCER start/ stop, continue, and song position pointer data can be transmitted/re- ceived.

OFF: This data cannot be transmitted/received.

CLOCK

INTERNAL: This instrument’s internal clock is used to control the performance. The clock of the connected equipment is disabled.

MIDI: The clock of the connected equipment is used to control the performance. This instrument’s clock is disabled. (The tempo is displayed as “ = – – –.”)

•The CLOCK is set to INTERNAL when the power to this instrument is turned on.

4.Repeat steps 2 and 3 for the other function if desired.

129

QQTG0665

Image 129

Technics sx-PR804/M, sx-PR604/M Control Messages, Realtime Messages, On the Midi Menu display, select Realtime

Contents

SX-PR604/M SX-PR804/M This Plug is not Waterproof -KEEP DRY How to replace the fuseBefore use For United Kingdom and Republic of Ireland Model Number Serial Number QQTG0665 QQTG0665 Following Applies only in the U.S.A Placement Power source Installation locationWord about the power cord Handling the power cord Contents Remote Controller Batteries PR804 Supplied accessoriesMusic stand AC cord CD-ROM Controls and functions PR604 Effect DisplayTranspose Sound Group Sequencer CONDUCTORTECHNI-CHORD Piano Performance Pads Controls and functions PR804Rhythm Group Progressive Pianist Fade IN/OUT Favorites Conductor Sequencer TransposeTECHNI-CHORD Block chords are automatically added to the melody Refer to PR804 Getting startedKeyboard cover Music Stand Playing the piano Play anywhere on the keyboardPress the Simple Piano button to Turn it on Progressive Pianist button again Press the Progressive Pianist button Press the Demo button See and listen to the demonstrationSlide Show PR804 Sound Group or Piano Select a sound Select the registration for a music style Intro & Ending 1 or 2 button Automatic panel settings Basic functions Press the OK button Record your performance Press the Sequencer Reset Fill 1 buttonPress the START/STOP button Panel Memory 1 to Store your panel settings Save Save data on a floppy diskSelect Technics Format Specify a file number to save to Following data can be saved/loaded Select the name of the pattern to load Load rhythm data from a Technics pattern disk Play back commercial song disks Direct PlayDisk Orchestra Collection DOC Theatre Sonic PR804 Sound-field schemaTheatre Sonic OFF Theatre Sonic on Press the Theatre Sonic button to turn it on Volume Remote Controller PR804Direct PLAY/SEQUENCER PLAY/PAUSE Song Skip About the display Volume balanceNormal display Home Mute Exit TEMPO/PROGRAMDisplay Hold Contrast Help FavoritesRHYTHM/STYLE Recall a Favorites display Selecting sounds Overview of sounds and effectsNX Sound Part Digital Drawbar Sound ExplorerAlphabet Percussive Tone Assigning parts to the keyboard ConductorAbout foot marks Split Right 1/RIGHT 2 OctaveCustomized split point String resonance PedalsSustain pedal Sostenuto pedal Touch Sensitivity Type and parameter settingsEffects Multi Effect Chorus Digital EffectEffect Edit Mic Reverb & Effect Reverb SoloBrilliance Transpose ⇒ Adjust the key with the + and buttons Techni-chord Type settingOrchestrator Press and hold the TECHNI-CHORDbutton For a few seconds Selecting rhythms Overview of rhythm performanceRhythm and accompaniment pattern Rhythm and Style Start the rhythm MetronomeMetronome TAP Tempo Playing the rhythm Mode settingIntro Count Intro Basic mode How to play chordsAuto Play Chord Fill Ending APC Hold How to use the Auto Play Chord Left HoldOn Bass APC Volume Chord Finder To exit the Chord Finder procedure, press the Exit buttonSelect Chord Finder Fade In/Fade Out Fade SettingFade Fade OUT Sound Arranger One Touch PlayPlaying back the sounds Piano Stylist Piano StylesEnsemble Styles Music Style Arranger mode How to use the Music Style ARMusic Style Arranger Ranger Assign a name to the bank/memory How to store the panel settingsAssign a name Bank View Panel Memory mode Recall the panel setupExpand Mode Filter Next Bank Auto Settting Playing phrasesPress the Bank button Select the desired bank from the display Copying phrases Phrase CopySEQ to PAD Copy Compile Record a phraseSelect Compile SET Chord Step Record Play Setting Popular features Sequencer featuresOutline of the Sequencer Memory capacity Record & Edit Summary of the Sequencer menu itemsCopy & Paste Range Edit Set the images Load your original images PictureMemo Sequencer parts Press the Sequencer Reset Fill in 1 button Recording procedureEasy Record Realtime Record Use the TEMPO/PROGRAM to adjust the re Cording tempo Program Menus buttonMulti-track recording Cycle Record Sequencer PlayStart END Cycle END Measure Press the Sequencer Play button to turn it on Adjusting the playback tempo Cycle PlayMedley Naming Sequencer VolumePanel Write Assign a name to the song Punch Record Song SelectSelect Use the Song Select and buttons to Select a song Step Record Auto Punch RecordRecord Correcting the data Storing control dataRepeat steps 5 through 8 to continue storing Performance data Sound data Assigning the images Picture ListLoading your original images Store a chord progression Example of storing a chord progressionMeasure While playing an Am chord, press the key one time Control data Store a rhythm progressionTrack Clear Correct the recorded chord progression Track Assign Track Assign PresetCorrect the recorded rhythm progression Track Assign Song Clear QuantizeQuantize Use the Track ∧ and ∨ buttons to specify Track number Edit Track ClearTrack Clear Inserting note data Drum Edit Cycle PlayInserting Drums data Select the function Copy and paste the recorded dataSong Copy Track Copy Measure Copy Specify where you wish to copy the selected Measures toMeasure Erase Measure Delete Changing the note position etc. of the re- corded data Measure InsertAPC to SMF Convert Transpose Velocity Change ADVANCE/DELAY Rhythm components which can be stored Outline of the ComposerComposer menu Memory Create a completely new rhythm Simple recording methodPrepare to record Easy Composer On the Recording display press the KEY Setting button KEY SettingAdjust the tempo On the Record Memory display, press OK button Chord Modify Change Record the partButton functions Part Setting PlaybackRhythm Group section, press the Memory button Repeat steps 2 through 5 to continue storing While you are recording, press the Step RE Cord button Select the function you wish to edit Measure EditSelect the function Use the Part ∧ and ∨ buttons to specify Pattern Copy Pattern CopyPattern Copy Copying one part at a time SEQ to Composer Copy SEQ to Composer CopyClear Copy Outline of the Disk Drive function Using commercial song disksInternal memory and Floppy Disk Drive Main parts of the Floppy Disk Drive Playback of commercial song disks Outline of the procedureGeneral Midi Level 2 GM2 Disk in USE Load Loading dataLoad Option Single Load On the Load page 1/3 display, press SMF button SMF LoadComposer Load Use the Load AS button to specify the load Method Direct Play On the Direct Play display, set the MED LEY settingsPlay Display during playback Saving data Song MedleyDisks Format Technics Format Save Save Option SMF FormatSequencer Song Save Disk management Set the automatic display when a disk is insertedDisk Tools Preferences Selecting an attribute Outline of the SoundSummary of the Sound menu items Word about parts Original Tuning TuningVibrato Delay PAN Adjust each parameter 1/5 2/5 MixerOn the Sound Menu display, select Mixer 3/5 4/5 5/5Edit Mixer Settings for each key Master TuningOriginal tuning Key Scaling APC Reverb Setting Theatre Sonic Part Setting PR804Sound Load Option Outline of the Reverb & Effect To adjust the sound quality to your likingTone Control Summary of the Reverb & Effect Menu items Select a sound to edit Turn on the Program Menus button Outline of the Sound EditSelect Sound Edit Summary of the Sound Edit menu items Tone Edit Easy EditAbout tones Tone Select Tone Copy KEY Layer Velocity Layer Tone Dynamics Pitch EditKEY Shift & Detune Pitch Pitch Envelope Filter EditFilter & Equalizer Use the page buttons to view the 2/3 display Touch & KEY Follow Filter EnvelopeEqualizer Filter Envelope Touch & KEY Follow Amplitude EditLevel Envelope LFO Edit LFOLFO Controller Edit Effect EditEffect Controller When you have finished typing the name Press the OK button ProcedureStore the new sound Select a new sound Outline of Control functions Follow the procedure to adjust the settingsSelect Control Select a function Pedal Setting Pedal SettingOn the Control Menu display, select Language Setting Favorites SettingOutline of Customize functions Disk Preferences Data Protection Display Time OutDisplay Time OUT Data Protection Video Out Mode Setting PR804 Midi Setting Load OptionUse these settings when Load Midi Parameters? Theatre Sonic Speaker Mode Theatre Sonic Speaker Mode PR804Select a mode Virtual Rear Speakers Midi terminals What is MIDI?Connection examples Midi channels Following kinds of data can be transmitted/received Outline of Midi functionsProgram Change Control Change Ting On the Midi Menu display, select Part SETUse the Part and buttons to select a Repeat steps 2 to 5 for each part as desired Realtime Messages Control MessagesMessages On the Midi Menu display, select Realtime Setting Common Setting Mode Setting Input/output SettingINPUT/OUTPUT Setting Storing user settings Midi PresetsRecalling the User settings Sets Program Change Midi Out Panel Memory OutputMemory Output Computer Connection Use the ∧ and ∨ buttons to select a modePuter Connection Interface Pedal Setting Power on settingsInitialize Initial On the rear panel ConnectionsBeneath the left end of keyboard Applications Audio Recorder Assembly PR604 Affix the pedal box to the speaker box Assembly PR804Affix the right and left side panels to the speaker box Place the piano body to the stand Group section Soul & Disco , Gospel & Blues Phenomenon RemedyEffects Sounds Drive DiskOther Contents Error messages 142 Index Solo Song Clear Song Select Sound Simple Piano Single Load SMF Load SMF SaveSound Arranger Sound Explorer Sound Edit Sound Group SX-PR604/M SX-PR804/M Specifications Dimensions W ⋅ H ⋅ D Power RequirementNET Weight Speakers Customer Services Directory 147 Se0402S0