Technics sx-PR604/M Remote Controller PR804, Volume, Direct PLAY/SEQUENCER PLAY/PAUSE, Song Skip

Basic functions

Remote Controller (PR804)

You can use the included wireless remote control to adjust the MAIN VOLUME, activate DIRECT PLAY (page 98), and activate SEQUENCER playback (page 67).

•To operate DIRECT PLAY with the remote controller, the normal playback display must be present with the disk inserted, and for the SEQUENCER playback, the instrument must be in the stand-by mode for playing back.

Battery installation

• Before insertion, make sure the battery polarity is as indicated.

• Do not use old batteries together with new ones.

• Remove the batteries from the battery compartment and store separately when the instrument is not to be used for a long time.

+

+ � (LR03, AAA, AM-4)

Button functions

VOLUME

Adjust the total volume level.

•You can adjust the volume level within the value set by the MAIN VOLUME control of the instrument.

•The volume level adjusted with the remote controller is reset when the instrument power is turned off.

<DIRECT PLAY/SEQUENCER>

PLAY/PAUSE

Play back or stop the performance temporarily.

FF

Fast forward (for DIRECT PLAY only)

Correct use of the remote controller

30 Disk Drive

Remote	30
	Within 7m
controller

SENSOR

•No object should be present between the remote control and the SENSOR.

•Avoid exposing the SENSOR to sources of strong radiation such as direct sunlight or fluorescent lamps.

•Keep the surfaces of the SENSOR and the emitter of the controller clean.

SONG SKIP	CAUTION:
Skip the current song (for DIRECT PLAY
only)	• Do not disassemble or modify.
	• Do not place any heavy object on top of the remote
STOP	controller.
	• Do not expose to direct sunlight for long periods of time.
Stop the performance.	• Do not spill any liquid.

30

QQTG0665