Technics sx-PR804/M, sx-PR604/M Set the images Load your original images, Picture, Memo

Part IV Sequencer

About the measure count

The measure count on the display corresponds to the time signature of the selected rhythm. However, if rhythm data is stored in the RHYTHM part and that part is played back, the measure count on the display corresponds to the stored rhythm data. (Refer to page 75.)

•If you wish to use a time signature not available in the preset rhythms, use the COMPOSER to create a new time signature. (Refer to page 86.)

Slide Show

This instrument can show various images which change automatically corresponding to the music progression just like the DEMO performance. Using the Slide Show function, you can create a multi-media show of images synchronizing with the sound.

Schematic

PICTURE 1	PICTURE 3		PICTURE 5
PIC #1	PIC #3		PIC #5
Intro	Theme A	Theme B	Ending
PIC #2		PIC #4	PIC #6
PICTURE 2		PICTURE 4	PICTURE 6

Set the images	Load your original images
To set the images, proceed as follows.	Besides a variety of preset images of the instrument, you
	can use your original images on your PC, etc.

1.Record a song in the SEQUENCER. (See pages 65 to 67.)

2.Specify the points (PIC) at which the image must be changed on the STEP RECORD (CONTROL) display. (See page 73.)

3.Replay the song.

•The selected image is displayed in whole screen at the specified point (PIC). The image continues to be shown until the next PIC point comes.

•Images will be displayed on either the normal display or the SEQUENCER PLAY display.

•PR804: You can output the displayed images to a external monitor such as a TV set. (See page 136.)

1.Save the image data to a disk.

•The instrument can read .BMP and .JPG formats (not compatible with all data with those extensions).

2.Insert the disk into the DISK DRIVE. (See page 96.)

3.Load the data using the STEP RECORD dis- play.

MEMO

•This instrument is compatible with images sized 640

x240 pixels. Even though an image sized up to 640

x480 pixels can be read, the data will be cut out to 640 x 240 pixels when loading.

•Depending on the size, it may not be possible to load the image.

•After the PICTURE LOAD display appears, no sound is produced on the instrument.

•PR604: The display consists of a monochrome, 4- gradation screen. It is recommend that you remake the images beforehand to adapt for the screen capacity using a graphic application, etc, in your computer.

Sequencer

63

QQTG0665