Part XII

MIDI

Program Change MIDI Out

Use this function to immediately transmit specific PROGRAM CHANGE and BANK SELECT data from this display on a specified MIDI channel.

1.On the MIDI MENU display, select PROGRAM CHANGE MIDI OUT.

3.Use the and buttons to change the setting.

The display looks similar to the following.

2.Use the and buttons to select a function.

MIDI CHANNEL:

The MIDI channel to transmit to (1 to 16).

PROGRAM CHANGE:

Specify the PROGRAM CHANGE number to transmit (1 to 128).

BANK SELECT MSB:

Specify the BANK SELECT MSB to transmit (0 to 127).

BANK SELECT LSB:

Specify the BANK SELECT LSB to transmit (OFF, 0 to 127).

When set to OFF, neither the LSB nor the MSB are transmitted.

4.Press the SEND button.

The specified data is transmitted.

The data is unconditionally transmitted regardless of the other settings.

MIDI

Panel Memory Output

These are settings affect the transmission data when the PANEL MEMORY buttons are operated.

1.On the MIDI MENU display, select PANEL

MEMORY OUTPUT.

The display looks similar to the following.

2.Use the P.MEM and buttons to select a PANEL MEMORY number.

3.Use the OFF/ON and buttons to specify whether the data in the selected PANEL MEMORY number is transmitted or not.

4.Use the PART and buttons to select a part (RIGHT 1, RIGHT 2 or LEFT).

5.Use the P. CNG and buttons to specify a program change number (0 to 127, or OFF).

6.Use the BANK LSB and buttons to specify a BANK LSB (0 to 127).

7.Use the BANK MSB and buttons to specify a BANK MSB (0 to 127).

8.Use the VOL and buttons to specify the volume (0 to 127, or OFF).

9.Repeat steps 4 to 7 for each part, as neces- sary.

10.Repeat steps 3 to 9 for each PANEL MEMORY number, as necessary.

133

QQTG0665

Page 133
Image 133
Technics sx-PR804/M, sx-PR604/M operating instructions Program Change Midi Out, Panel Memory Output