Technics sx-PR804/M, sx-PR604/M Mode Setting, Input/output Setting, INPUT/OUTPUT Setting

Part XII MIDI

Mode Setting

Initialize the settings for when the NX SOUND or GM LEVEL 2 mode is ON.

1.On the MIDI MENU display, select MODE

SETTING.

• The display looks similar to the following.

2.Select the mode.

•There are two modes for GM LEVEL 2 depending on the parts to use.

•The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function.

•When using an external sequencer in GM LEVEL 2, select <Ext. Sequencer> in the MIDI PRESETS options.

Input/output Setting

Make the settings which determine how various performance data is treated during data transmission and reception.

1. On the MIDI MENU display, select	• The upper (127) and lower (1) limits cannot be
INPUT/OUTPUT SETTING.	exceeded.
	FIX:
• The display looks similar to the following.
	The VELOCITY value of all received NOTE ON data
	is set to a fixed value. (1 to 127)
	• Select VELOCITY FIXED VALUE. Use the ∧ and
	∨ buttons to change the value.
	TECHNI-CHORD OUTPUT
	ON: Keyboard notes generated by the TECHNI-CHORD
	function are also transmitted.
	OFF: Only key note data of the pressed keys is trans-
	mitted.

MIDI

2.Use the ▲ and ▼ buttons to select the item.

RIGHT 1 INPUT

CONDUCTOR:

When data for the RIGHT 1 part is received, the CON- DUCTOR determines which part it is used for.

DIRECT:

When data for the RIGHT 1 part is received, it is treated as RIGHT 1 data, and performance data for all parts is received on their respective basic chan- nels.

AUTO PLAY CHORD INPUT

ON: Input data for the ACCOMP, BASS, DRUMS and CHORD parts is received.

OFF: Data for the above parts is not received.

•MIDI channels should be assigned to the above parts before exchanging data.

VELOCITY INPUT

DIRECT:

The VELOCITY value of received NOTE ON data is treated as is.

OFFSET:

The VELOCITY value of received NOTE ON data is offset (–50 to 50).

•Select VELOCITY OFFSET VALUE. Use the ∧ and

∨ buttons to change the value.

•All the values are offset from the current value by the fixed amount.

TRANSPOSE OUTPUT

ON: The note data of the transposed notes is trans- mitted.

OFF: The note data of the played keys is transmitted.

DRUM PATTERN OUTPUT

ON: Data from the DRUMS part is transmitted.

OFF: Data from the DRUMS part is not transmitted.

AUTO PLAY CHORD OUTPUT

ON: The data for the ACCOMP, BASS and CHORD parts is transmitted.

OFF: The data for the above parts is not transmitted.

•MIDI channels should be assigned to the above parts before exchanging data.

AUTO OCTAVE SHIFT OUTPUT

ON: If the octave has been automatically changed, the data of the transposed notes is transmitted, depend- ing on the sound.

OFF: The note data of the played keys is transmitted.

3.Use the ∧ and ∨ buttons to select the setting.

4.Repeat steps 2 and 3 for each item as desired.

131

QQTG0665