Part IX

Sound Edit

FILTER ENVELOPE TOUCH & KEY FOLLOW

Specify how the filter envelope (curve) changes relative to touch or note pitch.

1.Use the PAGE buttons to view the 4/4 display.

The display looks similar to the following.

2.Use the buttons to the left of the display to select a tone.

3.Use the TOUCH and buttons to modify how the respective filter envelopes change

relative to touch.

Use the TIME and buttons to specify the time change, and the LEVEL and buttons to specify the level, relative to touch.

At a – setting, the softer the keys are played, the greater the change. At a + setting, the harder the keys are played, the greater the change.

4.Use the ENVELOPE KEY FOLLOW and buttons to modify how the respective filter en-

velopes change relative to note pitch.

Adjust the respective slopes for attack (ATK), decay (DCY) and release (RLS). Use the CENTER and buttons to specify the center of the bend slope by note name.

Sound Edit

Amplitude Edit

Adjust the settings related to the volume of the sound.

LEVEL

1.On the SOUND EDIT menu, select AMPLI-

TUDE.

The display looks similar to the following.

2.Use the buttons to the left of the display to select a tone.

3.Use the LEVEL and buttons to select the volume.

4.Use the TOUCH and buttons to set the amount of volume change in relation to how

hard the keyboard is played.

At a – value, the softer the keyboard is played, the louder the sound. At a + value, the harder the keyboard is played, the louder the sound.

5.Use the CURVE and buttons to select the type of volume curve depending on touch.

6.Use the LEVEL KEY FOLLOW and but- tons to change the respective key follow set-

tings.

Use the SLOPE and buttons to adjust the bend slope. Use the RANGE and buttons to specify the pitch range by note name.

7.Repeat steps 2 to 6 for the other tones, as desired.

ENVELOPE

Specify how the volume changes over time, from the time the key is played to the time the sound dies out.

1.Use the PAGE buttons to view the 2/3 display.

The display looks similar to the following.

2.Use the buttons to the left of the display to select a tone.

3.Adjust the settings for the volume envelope.

Use the buttons below the display to set the corresponding values. The envelope is created on the display as you input the settings.

Use the SUSTAIN PEDAL and buttons to select the type of sustain.

LONG:

Extend the release time of the sound.

HOLD:

Maintain the key-pressed condition.

4.Repeat steps 2 and 3 for the other tones, as desired.

116

QQTG0665

Page 116
Image 116
Technics sx-PR604/M, sx-PR804/M operating instructions Amplitude Edit, Filter Envelope Touch & KEY Follow, Level, Tude