Technics sx-PR604/M Pan, Sustain, Glide Pedal, KEY Shift, Original Tuning, Reverb, Multi

Part VII Sound

<PAGE 1>

SOUND:

Use the SOUND ∧ and ∨ buttons to select a sound.

•The buttons on the control panel may also be used to select a sound.

VOLUME:

Use the VOLUME ∧ and ∨ buttons to adjust the volume (0 to 127).

PAN:

Use the PAN ∧ and ∨ buttons to adjust the stereo balance (L64–CENTER(CTR)-R63).

•At L64, the sound is completely to the left, at R63 completely to the right. At CENTER, the sound is at the center. The display indicates the selected position.

•Even at the same numerical value, the stereo balance may differ slightly depending on the sound.

SUSTAIN:

Use the ∧ and ∨ buttons to adjust the length of the sustain (1–8). Use the ON/OFF buttons to enable or disable the sustain effect, when the sustain pedal is depressed.

GLIDE PEDAL:

Use the GLIDE ON/OFF buttons to enable or disable the glide effect, if it has been assigned to the pedal.

•For pedal settings, refer to page 121.

KEY SHIFT:

Use the KEY ∧ and ∨ buttons to specify the amount of key shift (–24 to +24).

•A value of 1 means a shift of one semi-tone. To raise (or lower) the pitch one octave, set the value to +12 (or –12).

•The ∨ button is used to lower the pitch, and the ∧ button to raise the pitch.

TUNING:

Use the TUN ∧ and ∨ buttons to adjust the fine tuning (–128 to +127).

•The ∨ button is used to lower the pitch, and the ∧ button to raise the pitch.

ORIGINAL TUNING:

Use the ORIG. ON/OFF button to enable or disable the tuning for each sound.

•For details about ORIGINAL TUNING, refer to page 107.

Sound

<PAGE 2> <PAGE 3>

REVERB:

Use the REVERB ∧ and ∨ buttons to adjust the depth of the REVERB (0 to 127).

DIGITAL EFFECT:

Use the DIG. EFFECT ON/OFF buttons to set the DIGI- TAL EFFECT to on or off.

CHORUS:

Use the ON/OFF button to set the CHORUS to on or off. Use the ∧ and ∨ buttons to adjust the depth of the effect (0 to 127).

MULTI:

Use the ON/OFF button to set the MULTI EFFECT to on or off. Use the ∧ and ∨ buttons to adjust the depth of the effect (0 to 127).

EQ LOW:

Use the FC, GAIN ∧ and ∨ buttons to adjust the sound quality in the lower range.

EQ HI:

Use the FC, GAIN ∧ and ∨ buttons to adjust the sound quality in the upper range.

FILTER RESONANCE:

Use the RESO∧ and ∨ buttons to adjust the amount of resonance (0 to 127).

BRIGHTNESS:

Use the BRIGHTNESS∧ and ∨ buttons to adjust the brightness of the sound (0 to 127).

ATTACK TIME:

Use the ATTACK ∧ and ∨ buttons to specify the attack time (0 to 127).

DECAY TIME:

Use the DECAY ∧ and ∨ buttons to specify the decay time (0 to 127).

RELEASE TIME:

Use the RELEASE ∧ and ∨ buttons to specify the release time (0 to 127).

VIBRATO RATE:

Use the RATE ∧ and ∨ buttons to specify the vibrato speed (0 to 127).

VIBRATO DEPTH:

Use the DEPTH ∧ and ∨ buttons to specify the vibrato depth (0 to 127).

VIBRATO DELAY:

Use the DELAY ∧ and ∨ buttons to specify the time in- terval from when the keys are played until the vibrato starts (0 to 127).

• The center value is 64 (±0).

104

QQTG0665