Technics sx-PR604/M, sx-PR804/M operating instructions Play Setting, Chord Step Record

Part III Piano Performance Pads (PR804)

6.Press the OK button.

•For details about KEY SETTING, refer to page 87.

•For details about CHORD MODIFY CHANGE, refer to page 88.

7.Select the part to record to.

•Press the button for PART 1 or PART 2.

•Recording begins as soon as the pad is selected.

•Two parts can be recorded (PAD 1–4).

•The display looks similar to the following.

•Refer to page 89 for detailed information about PART SETTING.

8.Proceed to record.

•The recording procedure is the same as for the COM- POSER. (Refer to page 85.)

•When played back by the AUTO PLAY CHORD, the recorded phrase will be played in the specified chord.

•In the PLAY SETTING, if LOOP is set to OFF, LOOP recording is not possible.

Performance	Pads
Piano

PLAY SETTING

Select a playback mode.

1.On the PAD RECORDING display, press the

PLAY SETTING button.

•The display looks similar to the following.

2.Use the START ∧ and ∨ buttons to select a playback mode.

SYNCHRO:

During a rhythm performance, the phrase playback begins in time with the beat.

INSTANT:

The phrase starts to play immediately when the pad button is pressed, regardless of the rhythm.

3.Use the LOOP ∧ and ∨ buttons to enable or

disable loop playback.

ON:

Once the pad button is pressed, the phrase is played back repeatedly until the STOP button is pressed.

OFF:

The phrase is played back only once.

CHORD STEP RECORD

A chord progression can be stored in PAD 5 and PAD 6.

1.On the REALTIME RECORDING display,

press the CHORD STEP REC button.

•The display looks similar to the following.

2.Use the CURSOR buttons to move the cursor

to the position you wish to input.

•The cursor moves in 1/8-note increments.

3.Input the chord by playing it on the keyboard.

•The chord name is shown.

•Use the keys to the left of the specified keyboard split point (except for PIANIST mode).

4.Press the OK button.

5.Repeat steps 2 to 4 to store the rest of the

chord progression.

•To delete a chord which has been input, move the cursor to the specific chord and press the ERS button.

60

QQTG0665