Technics sx-PR604/M, sx-PR804/M operating instructions Effect Edit, Controller Edit, Digital Effect

Part IX Sound Edit

Effect Edit

These are settings related to the various effects applied to your edited sound.

EFFECT

1.On the SOUND EDIT menu display, select

EFFECT.

• The display looks similar to the following.

DIGITAL EFFECT

1.Use the PAGE buttons to view the 2/2 display.

•The display looks similar to the following.

•The display for the effect type which is best-suited for the sound currently being edited is selected.

2.Use the respective CHORUS ∧ and ∨ buttons to specify how the CHORUS is applied.

3.Use the REVERB ADJUST ∧ and ∨ buttons to specify how the REVERB is applied.

4.Use the MONO/POLY ∧ and ∨ buttons to select the sound output mode.

5.MONO: Use the PORTAMENTO ON/OFF but-

tons set portamento to on or off. Use the TIME ∧ and ∨ buttons to set the portamento time.

2.Use the TYPE ∧ and ∨ buttons to select the type of effect.

<ON/OFF button>

Specify whether the DIGITAL EFFECT button turns on or off when the sound is selected. When set to ON, the DIG- ITAL EFFECT button turns on automatically when the sound is selected.

<STEREO/MONO button>

Select stereo (STEREO) or monaural (MONO) output of the effect.

3.Use the buttons along the bottom of the display to select the attribute you wish to adjust.

•When the type is changed, the parameters revert to the factory defaults.

Controller Edit

Specify how operation of the controllers, such as the wheels, etc., affects the sound.

• These settings are effective when the instrument recieves controller data.

Sound Edit

CONTROLLER

1.On the SOUND EDIT menu display, select

CONTROLLER.

•The display looks similar to the following.

2.Use the buttons to the left of the display to

select a controller.

•Two functions can be assigned to each controller.

3.Use the FUNCTION ∧ and ∨ buttons to select a function for the controller.

4.Use the DEPTH ∧ and ∨ buttons to set the depth of the function applied by the controller.

5.Use the TONE ENABLE ON/OFF ∧ and ∨ buttons to set the controller to on or off for

each tone.

•When set to INV, the effect is applied inversely.

6.Repeat steps 2 to 5 for the other controllers, as desired.

7.Use the GLIDE ∧ and ∨ buttons to select whether or not the glide effect is active.

ENABLE:

The glide effect is enabled.

DISABLE:

The glide effect is disabled.

118

QQTG0665