Technics sx-PR804/M KEY Setting, On the Record Memory display, press OK button, Adjust the tempo

Part V Composer

3.On the RECORD MEMORY display, press the

OK button.

•The display looks similar to the following.

4.Press the CLEAR THE ENTIRE PATTERN

button.

• The display looks similar to the following.

6.Use the MEASURE ∧ and ∨ buttons to specify the number of measures in your new rhythm pattern (1 to 16).

7.Use the TIME SIGNATURE ∧ and ∨ buttons

to specify the meter of the pattern (1/4 to 8/4).

•When the settings for the MEASURE and TIME SIGNA- TURE of the INTRO or ENDING patterns are changed, the Maj and Min settings change at the same time.

8.Press the OK button.

Composer

5.Press the YES button.

• All the data for the selected pattern is erased.

KEY SETTING

Set the key and chord in which you wish the recorded pattern to be played. If the recorded performance is played in a key or chord different from this setting, the automatic accompani- ment will not be able to distinguish the correct chord.

1.On the RECORDING display press the KEY

SETTING button.

•The display looks similar to the following.

2.Use the KEY ∧ and ∨ buttons to set the key. Use the CHORD ∧ and ∨ buttons to set the chord type (Maj/Min).

3.When you have finished making the settings, press the EXIT button.

Recording procedure

1.In the START RECORDING area on the dis- play, select the rhythm part you want to record

first.

BAS: BASS

AC1–5:ACCOMP 1–5

DR1, 2: DRUMS 1, 2

•The metronome sound starts and the display looks similar to the following.

2.Adjust the tempo.

• The tempo is shown on the display as =.

•The tempo can be freely adjusted when you play back the rhythm pattern, so record at the tempo which is easiest for you to play.

3.Select the sound.

•For the DRUMS part, only sounds from the DRUM KITS sound group can be selected.

•For the ACCOMP and BASS parts, select sounds from groups other than the DIGITAL DRAWBAR sound groups.

(continued on the next page)

87

QQTG0665