Technics sx-PR804/M, sx-PR604/M operating instructions Error messages, Contents

Error messages

No.	Contents
00	The data on the disk that you are using is for a
	different product.
01	An error has occurred while the disk was loading.
	Please try again!
02	There is no disk in the Disk Drive.
03	The file that you tried to load is empty.
05	An error has occurred while the disk was saving.
	Please try again!
06	The disk that you are using is write protected.
	Please remove the write protection and try again.
07	The disk that you are using is full. Please use
	another disk.
	An error has occurred while the disk was
08	formatting. The disk that you are using may be
	faulty.
	Please try formatting another disk.
10	The data is already copy protected.
15	The song you are trying to save is empty.
16	This STANDARD MIDI FILE is incompatible with
	this instrument and cannot be loaded.
17	This is not a STANDARD MIDI FILE.
18	The timebase (PPQ resolution) that you tried to
	load is not 24/48/96/192/288/384 PPQ.
20	A problem has occurred with your SEQUENCER
	Data.
	This might be due to a damaged or faulty disk.
21	Memory full
22	It is necessary to press REC STOP to complete
	this procedure.
23	It is impossible to change the time signature
	because it has already been set in the existing
	tracks.
24	A rhythm track already exists. It is impossible to
	assign two tracks to rhythm.
25	It is only possible to change the velocity on a
	melody track.
26	It is only possible to merge melody tracks.
	Tracks such as rhythm, chord and control cannot
	be merged.
27	It is only possible to copy melody tracks.
	Tracks such as rhythm, chord and control cannot
	be copied.
28	This song is too long to be saved as a MIDI file.
	The MIDI file that you have tried to load exceeds
29	the memory capacity of this instrument and cannot
	be played. The SEQUENCER memory has been
	cleared.
	It is not possible to change the time signature or
	measure length of a COMPOSER pattern after it
	has been recorded. If you want to proceed, you
30	must first clear the entire COMPOSER pattern.

No.		Contents
	The time signature of the pattern from which you
	are copying is different from the COMPOSER
31	memory that you are using.
	Either: Change the time signature
		of the COMPOSER memory
	or:	Copy from a pattern that has
		the same time signature
32	Memory full
33	Select a Track before setting parameters for AUTO
	PUNCH RECORD.
43	The file that you are trying to load was saved on
	a previous model. It is only possible to load using
	the “PERFORMANCE” option.
44	It is impossible to edit a Drum Kit. Please select
	a different sound from any group except Keyboard
	Percussion.
46	It is only possible to insert MELODY Tracks.
	Tracks such as RHYTHM, CHORD and CONTROL
	cannot be inserted.
47	This procedure is not possible with a composer
	pattern or the metronome. Please select a preset
	rhythm pattern.
54	It is not possible to record using preset banks,
	compile banks, or control banks. Please select
	one of the user banks.
	Special tracks such as CHORD (APC), RHY and
55	CTL exist in the song from which you are copying
	and are incompatible with the destination song
	because it is in the GM mode.
56	AUTO PUNCH recording has been unsuccessful
	because SEQUENCER operation was interrupted
	before the PUNCH OUT measure was reached.
	The song that you have tried to load exceeds this
58	instrument’s available memory and cannot be
	loaded. The selected song memory has been
	cleared.
	The computer connection is not active because
62	the computer port switch is set to MIDI. Please
	turn the power off, set the switch to the desired
	setting and turn the power back on.
64	Please select the Panel Memory that you want to
	name.
65	It is not possible to use the CHORD FINDER in
	this mode. Please select CHORD FINDER from
	HOME page or CHORD STEP RECORD page.
66	SOLO pads are special pads which include Chord
	information. Pleases use SOLO pads when the
	rhythm and accompaniment is playing.
67	There are no APC or CHORD tracks. Select and
	APC track or CHORD track, and try again.
68	It is not possible to record directly into the SOLO
	pads. Record on the SEQUENCER and Copy the
	melody and chord information into a SOLO pad.
69	It is not possible to delete all measures.
70	It is not possible to insert over 16 measures in a
	PATTERN.
71	It is not possible to set the start measure to the
	measures you set to copy.

141

QQTG0665