Technics sx-PR804/M, sx-PR604/M operating instructions Velocity Change, Transpose

Part IV Sequencer

VELOCITY CHANGE

Modify the recorded velocity in specific measures of specific tracks.

1.Use the TRACK ∧ and ∨ buttons to select the

track you wish to edit.

•You cannot select the track for the CONTROL, RHYTHM or CHORD part.

•If ALL is selected, all tracks will be edited.

2.Use the FIRST MEASURE ∧ and ∨ buttons to specify the start point (measure number) of the velocity change.

3.Use the LAST MEASURE ∧ and ∨ buttons to specify the end point (measure number) of the velocity change.

4.Use the VELOCITY ∧ and ∨ buttons to specify

the change in velocity.

•The value you select will be added to or deleted from the current velocity.

TRANSPOSE

Change of key of specific measures of specific tracks.

1.Use the TRACK ∧ and ∨ buttons to select the

track you wish to edit.

•You cannot select the track for the CONTROL, RHYTHM or CHORD part.

•If ALL is selected, all tracks will be edited.

2.Use the FIRST MEASURE ∧ and ∨ buttons to specify the start point (measure number) of the transpose.

3.Use the LAST MEASURE ∧ and ∨ buttons to specify the end point (measure number) of the transpose.

4.Use the TRANSPOSE ∧ and ∨ buttons to

specify the change in pitch.

•Increments are in semitones. A value of 12 is one octave. A – value lowers the pitch, and a + value raises it.

5. Press the OK button.	5. Press the OK button.
	• The confirmation display appears. Press the YES button
• The confirmation display appears. Press the YES button	to execute the function, or press the NO button to cancel
to execute the function, or press the NO button to cancel	the function.
the function.

NOTE CHANGE

Change of pitch of specified notes.

1.Use the TRACK ∧ and ∨ buttons to select the

track you wish to edit.

•You cannot select the track for the CONTROL, RHYTHM or CHORD part.

•If ALL is selected, all tracks will be edited.

2.Use the FIRST MEASURE ∧ and ∨ buttons to specify the start point (measure number) of the note change.

3.Use the LAST MEASURE ∧ and ∨ buttons to specify the end point (measure number) of the note change.

4.Use the TARGET NOTE ∧ and ∨ buttons to specify the pitch of the note you wish to

change.

•The number next to the note name is its note number.

5.Use the CHANGE TO ∧ and ∨ buttons to specify the pitch you wish to change to.

6.Press the OK button.

•The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function.

83

Sequencer

QQTG0665