Picture Adjustments
The picture adjustments allow you to fine tune the image quality of the selected input. When you press one of the Picture Adjustments buttons (Color/Tint, Brightness/Contrast, Size, Center, or Filter) once, the corresponding image adjustment menu for the selected output (lit Output LED) image appears on the LCD screen. Select the other output using the Output buttons to call the image adjustment menu for the other output. In either screen, adjustments can then be made by rotating the Adjust 
knob or the Adjust 
knob. Picture adjustment settings are stored in nonvolatile memory; when the switcher is powered down and powered up, the settings are restored.
Adjust an image for centering, sizing, brightness, contrast, color, tint, zoom, or detail as follows (see figure 23):
| Extron Electronics |
| Extron Electronics |
|
|
| ISM 482 |
| ISM 482 |
|
|
Power | Integration |
|
| Display | |
on | Scaling Matrix | 2 sec. | Version xxxx | 2 sec. | Cycle |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
COLOR/ |
|
| BRT/ |
|
| SIZE |
|
| CENTER |
| FILTER | |||||||||||||||
| TINT |
|
| CONT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Output #1 |
| Output #1 |
| Output #1 |
|
| Output #1 |
| Output #1 | |||||||||||||||||
Color | Tint | Brightness | Contrast | Horz |
| Size | Vert | Horz |
| Center Vert | Horz |
| Filter Vert | |||||||||||||
127 |
|
|
| 128 | 063 |
|
| 063 | 450 |
|
|
|
| 400 | 500 | 550 | 3 | 7 | ||||||||
NOTE: Press the appropriate output button to select the desired output.
10 sec. timeout
NOTE: The Adjust 
knob and the Adjust 
knob are used to adjust the image settings on the left and right sides of the LCD screen, respectively.
Figure 23. Picture Adjustments Flowchart
1.Press the desired input button and output button to select an
NOTES:
•The adjustments are made to the input signal as it is switched to the tied output (1 or 2) only. (The output LED is lit and the selected output is shown in the LCD). The adjustments do not affect the same input tied to the other output.
•Color adjustments are available only for component video,
Tint adjustments are available only for
2.Press the appropriate picture adjustment button: color and tint, brightness and contrast (Brt/Cont), sizing (Size), centering (Center), or filter. The LCD display shows the name of the adjustment and the current setting value.
ISM 482 Integrated Scaling Matrix Switcher • Operation | 25 |
