Extron electronic ISM 482 manual Output Configuration menu, Output Resolution submenu

Output Configuration menu

Figure 19 is a flowchart that shows an overview of the Output Configuration menu, the submenus, and the available settings.

	Default
	Cycle
	Menu
	10 sec.
	Video & Audio
	Configuration
	Menu		10 sec.				10 sec.
	Output		Output #1 Resolution		Output #1 Sync Type Menu
		Next	1280 x 1024	Next			RGBHV		Next
	Configuration		Refresh Rate			Sync Polarity
			60 Hz		H Neg			V Pos
	Menu
			1				1
	Advanced			Output Configuration:				Output Configuration:
	Configuration
			OUTPUTS If necessary, select the				OUTPUTS	If necessary, select the
	Menu			other output and repeat.				other output and repeat.
	User Presets		2				2
		Output resolutions	Output frequencies
		See the table on the	NOTE: Lock = AFL
		next page for available
	Menu	combinations of
		resolutions and refresh
		rates.		Output signal format		Polarity combinations
		Default: 1024x768, 60 Hz
Menu	Exit Menu			• RGBHV		• H-/V- (default)			• H+/V-
	Press Next to Exit			• RGBS		• H-/V+			• H+/V+
	Next
	Figure 19. Output Configuration Menu Flowchart

Output Resolution submenu

Select the output whose resolution and refresh rate you want to set by pressing the desired Output button.

Rotate the Adjust knob while this submenu is active to select one of the available output resolutions.

Rotate the Adjust knob while this submenu is active to select one of the available refresh (vertical scanning) rates. Selecting Lock enables the Extron Accu-RATE Frame Lock (AFL) feature. Accu-RATE Frame Lock eliminates image tearing and other artifacts of scaling motion video by eliminating frame rate conversion. It exactly matches the output rate of the ISM to the frame rate of input 1. Select this feature if you will be using motion video sources with a display that is capable of a variety of refresh rates. AFL is compatible with 50 Hz and 60 Hz only.

The default resolution and rate is 1024 x 768 @ 60 Hz.

If you need to set the resolution and refresh rate on the other output, press the other output button. You do not need to exit this submenu.

ISM 482 Integrated Scaling Matrix Switcher • Operation 18