Extron electronic ISM 482 manual HTML Operation, Loading the Startup Control Page

HTML Operation

This section describes

•Loading the Startup (Control) Page

•Control Page

•System Configuration Page

•File Management Page

•I/O Configuration Page

The ISM 482 can be controlled and operated through its Ethernet port, connected via a LAN or WAN, using a Web browser such as the Microsoft® Internet Explorer®. This chapter describes the factory-installed HTML pages, which are always available and cannot be erased or overwritten.

NOTE: If your Ethernet connection to the ISM is unstable, try turning off the proxy server in your Web browser. In Internet Explorer, click Tools > Internet Options > Connections > LAN Settings, uncheck the “Use a proxy server...” box, and then click Ok.

Loading the Startup (Control) Page

Access the switcher using HTML pages as follows:

1.Start the Web browser program.

2.Click in the browser’s Address field.

3.Type the switcher’s IP address in the browser’s Address field.

NOTE: If the value has not been changed, the factory-specified default, 192.168.254.254, is the correct value for this field.

4.If you want the browser to display a page other than the default page (such as a custom page that you have created and uploaded), enter a slash (/) and the name of the file to open.

NOTES:

•The browser’s Address field should display the address in the following format: xxx.xxx.xxx.xxx/{optional_file_name.html}

• The following characters are invalid in file names: {space} ~ @ = ‘ [ ] { } <

>’ “ ; : \ and ?.

5.Press the keyboard Enter key. The switcher checks to see if it is password protected.

•If the switcher is not password protected, proceed to step 7.

•If the switcher is password protected, the Enter Network Password page (see figure 37 on the next page) appears.

ISM 482 Integrated Scaling Matrix Switcher • HTML Operation 53