
ERROR MESSAGES
If the machine is not properly set when the start/stop button is pressed, or if a correction of your operating procedure is required, the machine will not start and will instruct you with an alarm and a warning message on the LCD.
Warning messages
This message appears when the motor becomes locked, such as when the thread is entangled.
SETTING UPSEWING
This message appears when the start/stop button is pushed while the foot controller is connected.
STITCHES | UTILITY |
This message appears when the start/stop button, or reverse/reinforcement stitch button is pressed, but no pattern has been selected.
(CREATE YOUR OWN STITCH DESIGNS) | MY CUSTOM STITCHTM |
This message appears when the reverse/reinforcement stitch button, needle position button or thread cutter button is pushed while the bobbin winder shaft is moved to the right.
EMBROIDERING
This message appears when the embroidery unit is being initialized, but the presser foot is lowered.
This message appears when the start/stop button, reverse/reinforcement stitch button, thread cutter button or the foot controller is pressed while the presser foot lever is raised.
This message appears when the start/stop button or reverse/reinforcement stitch button is pressed while a pattern other than a buttonhole is selected and the buttonhole lever is lowered.
MAINTENANCE |
|
|
MESSAGES | ERROR |
|
SEWING CHART |
|
|
IN MACHINE) | (PROGRAMMED | PATTERNS |
125