BLIND HEM STITCHING
1 | 2 |
|
| 1 | 1 |
|
| 4 |
|
| 4 |
R
Blind hem stitch
1for sewing fabric other than stretch fabric
2 for sewing stretch fabric
1.Fold the fabric and baste it as illustrated. Then, fold the fabric once again as shown.
1 3/16" (0.5 cm)
2 Right side of fabric
3 Wrong side of fabric
4 Basting stitch
CONTENTSSETTING UPSEWING
1 |
R
2.Attach blind hem foot R, lower the presser foot lever, and position the fabric under the presser foot so that the edge of the folded hem touches the guide of the presser foot.
1 Guide
2 Folded hem
3.With the STITCH WIDTH keys, adjust the needle position so that the needle slightly catches the fold of the hem, and then sew the fabric.
1 Needle drop point
Note
If automatic thread cutting and automatic reverse/reinforcement stitching are turned on before you start sewing, pressing just the start/stop button automatically sews reinforcement stitches before sewing. In addition, pressing the reverse/reinforcement stitch button at the end of the stitching automatically sews reinforcement stitches, trims the threads and stops the machine.
4.Turn over the fabric and remove the basting stitch.
1 Wrong side of fabric
2 Right side of fabric
54