Brother PC 6500 operation manual Automatic Thread Cutting

AUTOMATIC THREAD CUTTING

Before sewing, turn on automatic thread cutting to cut the threads automatically at the end of sewing. This function is convenient when sewing buttonholes and bar tacks.

CONTENTS

1

1

2

1.Select a stitch.

2.Turn on automatic thread cutting by pressing

so that it appears as .

1 Automatic thread cutting turned on

Note

–Automatic reverse/reinforcement stitching must also be used when automatic thread cutting is turned on.

–Pressing so that it changes back to turns off automatic thread cutting.

3.Press the start/stop button.

1 Reverse/reinforcement stitches are sewn, and then sewing starts.

Note

If the start/stop button had been pressed to pause sewing, the beginning reverse/reinforcement stitches are not sewn.

4.When the end of the stitching is reached, press the reverse/reinforcement stitch button to sew reverse/reinforcement stitches, stop sewing, and cut the threads.

2 Reverse/reinforcement stitches are sewn, sewing stops, and then the threads are cut automatically.

SETTING UP
SEWING
STITCHES	UTILITY
STITCH DESIGNS)	(CREATE YOUR OWN	MY CUSTOM STITCHTM
EMBROIDERING
MAINTENANCE
MESSAGES	ERROR
SEWING CHART
IN MACHINE)	(PROGRAMMED	PATTERNS

37