EMBROIDERING

Simple embroidering

Embroidering multi-color patterns

1.After threading the bobbin thread, the upper thread and the needle, pass the thread down through the hole in embroidery foot Q, and then pull about 2" (5 cm) of the upper thread out toward the rear of the machine.

2.Design the embroidery pattern.

3.Lower the presser foot and press the start/stop button to start the machine. After sewing 5 to 6 stitches, stop the machine and trim off any excess thread at the beginning of the embroidery.

4.Press the start/stop button again to continue embroidering. The machine stops embroidering when it has completed all of the stitching with the thread color that is installed.

Note

The sewing speed is automatically controlled by the machine according to the pattern selected.

CONTENTS

 

 

SETTING UP

 

 

SEWING

 

 

STITCHES

UTILITY

 

STITCH DESIGNS)

(CREATE YOUR OWN

MY CUSTOM STITCHTM

EMBROIDERING

 

 

When the selected pattern can be embroidered using different colors of thread, the pattern appears on the screen separated into each color. The order of embroidering is shown from left to right.

MAINTENANCE

(1) (2) (3) (4)

Example: To embroider the floral pattern of the letter “B”

1.Thread the first color. (Refer to the procedure explained above.)

When the start/stop button is pressed, the first part of the pattern (1) is sewn, and then the machine automatically sews the reinforcement stitches and stops.

Note

Be sure to raise the presser foot before changing the thread.

When embroidering for this color is finished, the parts of the pattern automatically move one position to the left.

MESSAGES

ERROR

 

SEWING CHART

 

 

IN MACHINE)

(PROGRAMMED

PATTERNS

93

Page 96
Image 96
Brother PC 6500 operation manual Simple embroidering Embroidering multi-color patterns