Brother PC 6500 Combining a frame pattern with a design, Making badges or decorative patches

Combining a frame pattern with a design

1.Create a frame pattern, and then embroider it.

A cross (+) is sewn in the center of the frame after it is embroidered. This mark can be used as a guide for positioning characters or other patterns within the frame.

CONTENTSSETTING UPSEWING

2.Create the inner design, and then press the SET key, then the LAYOUT key to display the layout screen.

3.Select the center needle position (Make sure the button

appears as .), and then adjust the embroidery pattern position so that the hole in embroidery foot Q aligns with “+”.

Then, embroider the design.

STITCHES UTILITY

Making badges or decorative patches

1. After embroidering a frame and the inner design, select the

same frame pattern, press , as the stitch, and then sew

the same frame pattern around the outside of the original

frame so that it is slightly larger than the original.

2.Cut cleanly around the outside frame, following the line of the outside stitching.

STITCH DESIGNS)	(CREATE YOUR OWN	MY CUSTOM STITCHTM
EMBROIDERING
MAINTENANCE
MESSAGES	ERROR
SEWING CHART
IN MACHINE)	(PROGRAMMED	PATTERNS

119