Brother PC 6500 Lcd Density, Adjusting the density with the main power switch, Light →, Dark →

LCD DENSITY

At times, changes in the ambient temperature may make all or part of the screen light or darker; this is not the sign of a malfunction. If the screen becomes difficult to read, adjust its density.

Note

The screen may become dark immediately after the power is turned on. This is a feature of the light that illuminates the screen, and is not the sign of a malfunction. The screen will return to its normal level of brightness after approximately 10 minutes.

CONTENTSSETTING UP

Adjusting the density with the main power switch

1. While pressing anywhere in the LCD, turn the sewing machine off, then back on again.

SEWING
STITCHES	UTILITY

Adjust the screen density.

After making the adjustment, turn the power off, then on again.

Light →	1
Dark →	2

2.Adjust the density of the LCD.

To make the LCD lighter, press either the SEWING key or the MY CUSTOM STITCHTM key.

To make the LCD darker, press either the OPERATION GUIDE or the STITCH ADJUST key.

The density of the LCD changes each time one of these keys is pressed.

1 Press this key to make the density lighter.

2 Press one of these keys to make the density darker.

3.After making the adjustment, turn the machine off, then back on again.

STITCH DESIGNS)	(CREATE YOUR OWN	MY CUSTOM STITCHTM
EMBROIDERING
MAINTENANCE
MESSAGES	ERROR
SEWING CHART
IN MACHINE)	(PROGRAMMED	PATTERNS

11