Brother PC 6500 operation manual Needle, Checking the needle, Changing the needle

NEEDLE

Checking the needle

1

Changing the needle

6

1

6

Place the flat side of the needle on a flat surface and check that the needle is not bent up, down, or to either side. If the needle is bent, it should be thrown away to prevent damage to your project or to the machine.

1Flat surface (needle plate, glass, ruler, etc.)

A 75/11 needle is installed in the machine when you purchase it.

1.Press the needle position button to raise the needle.

2.Turn off the sewing machine and lower the presser foot lever.

3.Loosen the needle clamp screw with a screwdriver.

4.Pull out the needle.

CAUTION

Do not apply a strong force when loosening or tightening the needle clamp screw, otherwise certain parts of the machine may be damaged.

5.With the flat side of the needle facing toward the back, insert the needle as far up as possible so that it touches the needle stopper. Fasten the screw securely with a screwdriver.

1 Needle stopper

6.Turn the sewing machine on.

CONTENTS
SETTING UP
SEWING
STITCHES	UTILITY
STITCH DESIGNS)	(CREATE YOUR OWN	STITCHTM	MY CUSTOM
EMBROIDERING
MAINTENANCE
MESSAGES	ERROR
SEWING CHART
IN MACHINE)	(PROGRAMMED	PATTERNS

20