Brother PC 6500 operation manual Darning

DARNING
1	2
	1
	3
	2
	3
	5

3

5

1

2

3

5

A

Darning

1for medium weight fabric

2 for thick fabric

1.Attach buttonhole foot A and set the scale to the desired length of the darning.

1 Scale

2 13/64" (0.5 cm)

3 Length of darning

Note

The maximum length of the darning is 1-3/16” (3.0 cm).

2.Check that the needle drops at the desired position and lower the presser foot lever, making sure that the upper thread passes underneath the buttonhole foot.

3.Slide the outside frame of the buttonhole foot

backward as far as possible as shown in the illustration at the left, making sure that there is A

no gap behind the part of the foot marked “A”.

Note

If the buttonhole foot is not slid back as far as possible, the darning will not be sewn with the correct size.

4.Lower the buttonhole lever so that it is positioned behind the metal bracket on the buttonhole foot.

1 Buttonhole lever

2 Metal bracket on the buttonhole foot

5.Gently hold the end of the upper thread, and then press the start/stop button to start the machine. Once sewing is completed, the machine automatically sews reinforcement stitches, and then stops.

Note

If automatic thread cutting is turned on before you start sewing, both threads are automatically cut after the reinforcement stitches are sewn.

CONTENTS
SETTING UP
SEWING
STITCHES	UTILITY
STITCH DESIGNS)	(CREATE YOUR OWN	STITCHTM	MY CUSTOM
EMBROIDERING
MAINTENANCE
MESSAGES	ERROR
SEWING CHART
IN MACHINE)	(PROGRAMMED	PATTERNS

62