Brother PC 6500 operation manual Creating frame patterns

Creating frame patterns

Frame patterns are created by combining the desired frame shape with the selected stitch.

CONTENTSSETTING UP

1

12

1 2 3 4

5

1. Press .

Note

If the screen shown at the left is not displayed, press the FONT/DECORATIVE key.

2.Press the key for the desired frame shape.

1 Press this key to display more frame shapes. (A total of 10 different frame shapes are available.)

3.Select the desired stitch.

1 This shows the currently selected frame

shape.

2Press this key to display more stitches. (A total of 12 different stitches are available.)

The selected frame pattern is shown on the screen.

1This shows the currently selected stitch.

2Press this key if you would like to change the embroidering position within the frame (page 105), change the overall size of the pattern (page 108), or use the Help function, which allows you to search for a specific point in the embroidering of the pattern (page 112).

Note

This key changes to the HELP key after embroidering starts.

SEWING
STITCHES	UTILITY
STITCH DESIGNS)	STITCHTM (CREATE YOUR OWN	MY CUSTOM
EMBROIDERING
MAINTENANCE
MESSAGES	ERROR
SEWING CHART

3Press this key to turn on and off automatic thread cutting. (Refer to page 37.)

4Press this key to return to the screen where the pattern was selected (step 2 above).

5If the frame pattern can be embroidered using different colors of thread, the embroidering order of each part of the pattern is shown from left to right.

IN MACHINE) (PROGRAMMED PATTERNS

100