Brother PC 6500 operation manual Attaching the embroidery frame to the embroidery arm

Attaching the embroidery frame to the embroidery arm

CAUTION

Be sure to wait until the embroidery unit has finished initializing before trying to attach the embroidery frame. (Refer to page 87.)

1.Raise the presser foot lever to its highest position, and then pass the embroidery frame under the presser foot, making sure that the mounting bracket of the frame is on the left side and the right side of the fabric is facing up.

CONTENTS
SETTING UP
SEWING
STITCHES	UTILITY

2

1

2.Align the slots in the mounting bracket of the frame with the two knobs on the frame holder of the embroidery arm, and then press the frame onto the frame holder so that it clicks into place.

1 Frame holder on embroidery arm

2 Knobs

Note

Be sure that the mounting bracket on the embroidery frame is attached to both knobs. If it is attached to only one knob, the pattern may not be embroidered correctly.

STITCH DESIGNS)	STITCHTM (CREATE YOUR OWN	MY CUSTOM
EMBROIDERING

Removing the embroidery frame from the embroidery arm

While pushing the release lever on the frame holder to the left, lift the embroidery frame up to remove it.

1Release lever

1

MAINTENANCE
MESSAGES	ERROR
SEWING CHART
IN MACHINE)	(PROGRAMMED	PATTERNS

92