Brother PC 6500 operation manual Eyelet Stitching

EYELET STITCHING N

Use this stitch for making eyelets, such as on belts.

1Eyelet

1

1.Press the STITCH ADJUST key, and then select the eyelet size.

CONTENTSSETTING UP

L (large): 9/32" (7.0 mm)

M (medium): 15/64" (6.0 mm)

S (small): 13/64" (5.0 mm)

L M S

(Shown in actual size.)

2.Attach presser foot N.

3.Check that the needle drops at the desired position, lower the presser foot lever, and then start sewing. Once sewing

is completed, the machine automatically sews reinforcement stitches, and then stops.

1 Needle drop point

Note

If automatic thread cutting is turned on before you start sewing, both threads are automatically cut after the reinforcement stitches are sewn.

4. Make a hole in the center with an eyelet punch.

SEWING
STITCHES	UTILITY
STITCH DESIGNS)	(CREATE YOUR OWN	MY CUSTOM STITCHTM
EMBROIDERING
MAINTENANCE
MESSAGES	ERROR
SEWING CHART
IN MACHINE)	(PROGRAMMED	PATTERNS

65