Entering Stitch Data

Note

Make sure that the embroidery unit is not attached.

1.Press the MY CUSTOM STITCH key. 1 MY CUSTOM STITCH key

1This area displays the stitch that is being created.

2The number beside indicates the y coordinate of the tip

of , and the number beside indicates the x

coordinate of the tip of .

3This number indicates the point indicated by within the stitch design.

4Press this key to display a screen that allows you to change a set point. (Refer to page 81 for more details.)

5Press this key to select whether one stitch or three stitches are sewn between two points.

6Press this key to erase the last point that has been set.

7Press this key to add the point indicated by .

8Press this key to finish creating the stitch and display the screen that allows you to see the entered stitch. (Refer to page 80.)

3.Select whether one stitch or three stitches will be sewn

between the first two points.To sew one stitch, press

so that it appears as ; to sew three stitches, touch the

key so that it appears as .

4.Use the arrow keys to move to the coordinates of the first point that was made on the grid sheet (from step 2 on

page 77).

5.Press the SET key to add the point indicated by .

6.Repeat steps 3 through 5 for each point that you have drawn on the grid sheet until the stitch design is drawn on

the screen as a continuous line.

Note

If you make a mistake while setting points, press the DEL key to erase the last point set.

7.Once you have finished entering the stitch data, press the END key.