Hitachi CMP4221 Operating Instructions, Turing Power On and Off, Indicating lamp, Control Panel

OPERATING INSTRUCTIONS

Indicating lamp

Main power switch

Control Panel

SUB-POWER button

POWER OFF button

Turing Power On and Off

To turn the monitor power ON, press the main power switch on the monitor main unit to ON, and then press the SUB POWER button or the ON/OFF or ON button on the remote control.

To turn the monitor power OFF, press the SUB POWER button or the ON/OFF or OFF button on the remote control, and then press the main power switch on the monitor main unit to OFF.

zDuring normal use, the main power switch is set in the ON position, and the monitor can then be turned ON/OFF using the SUB POWER button or the ON/OFF button on the remote control.

Indicating lamp

Indicating	Power status	Operating
lamp
OFF	OFF	When the main power switch is set
		to OFF.
Lights red	ON	When the main power switch is set
		to ON.
		When the main power switch is ON,
		and the ON button on the remote
Lights green	ON	control or the SUB POWER button
		on the underside of the front of the
		frame is ON.

ATTENTION

ξAvoid repeatedly turning the monitor on and off at short time intervals. Failures might result from such operation.

ξTurn off the main power switch before leaving the monitor out of use for an extended period of time.

ξIf a power failure occurs while the main unit is running, it would be powered on upon recovery from the failure. Turn off the unit main power switch before leaving the main unit.

ENGLISH

POWER ON button

POWER ON/OFF button

16