How to clean the cabinet of the monitor
Use a soft cloth to clean the cabinet and control panel of the monitor. When excessively soiled dilute a neutral detergent in water, wet and wring out the soft cloth and afterward wipe with a dry soft cloth.
Never use acid/alkaline detergent, alcoholic detergent, abrasive cleaner, powder soap, OA cleaner, car wax, glass cleaner, etc. especially because they would cause discoloration, scratches or cracks.
Prevention of an obstacle to Radio receivers
This monitor has been designed pursuant to the international EMI standards. This is to prevent a problem to Radio receivers.
ξKeep the monitor away from Radio.
ξAdjust Radio antennas in order for the monitor not to receive interference.
ξThe antenna cable of Radio should be kept away from the monitor.
You can check if this monitor influences Radio receivers by turning off all other equipment other than the monitor.
If you find a problem receiving Radio when using the monitor, check the instructions mentioned above.
Precautions for the cable connection
ξDo ensure that all connections, (including the power plug, extension leads and interconnections between the pieces of equipment), are properly made and in accordance with the manufacturers instructions. Switch off and withdraw the power plug before making or changing connections.
ξConfirm the connector is fixed tightly when the signal cable is connected. Also confirm the screws on the connector are tightened.
ξPlug the power cord of the monitor into a different socket from that for other equipment, such as Radio etc.
ξUse a plug with ground terminal and make sure that it connects to the ground.
Precaution during transportation
Please pay attention when you transport this monitor because it is heavy.
Furthermore, use the original carton box and its packaging materials when the monitor is transported.
Failure to transport the monitor in any carton except the original carton may result in damage to the monitor.
Save the original carton box and all packing material.
Do not physically impact the remote control.
ξA physical impact could cause damage or malfunction of the remote control.
ξTake care not to drop the remote control.
ξDo not place heavy objects on the remote control.
Avoid strong rays.
Any strong rays (such as direct sun rays or room lighting) onto the remote control sensors could invalidate the remote control.
Avoid radio interference.
Any interfering radiation could cause distorted images or noises.
ξAvoid radio generator such as a mobile telephone, transceiver, etc. around the monitor.
Set the sound volume at a suitable level.
It is better to keep the volume level low and close the windows at night to protect the neighborhood environment.
Precautions for the installation
ξDo not use makeshift stands and NEVER fix legs with wood screws - to ensure complete safety, always fit the manufacturers approved stand or legs with the fixings provided according to the instructions.
ξUse only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from
ξThis product is designed to comply with the recommended safety standards for tilt and stability. Do not apply excessive pulling force to the front, or top, of the cabinet that could cause the product to overturn resulting in product damage and/or personal injury.
ξFollow instructions for wall, shelf or ceiling mounting as recommended by the manufacturer.
ξOnly use the attachments/accessories specified by the manufacturer.
ξConsult your dealer if you are in any doubt about installation, operation or safety of your equipment.
Other precautions
ξDo not leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a
ξDisposal of this product may require specific instructions pertaining to your resident region.
ξNever guess or take any chances with electrical equipment of any kind - it is better to be safe than sorry!
ENGLISH
9