Dolphin Peripherals 9500 SIM Card Installation, SIM Card Requirements, To Install a SIM Card

SIM Card Installation

Short for Subscriber Information Module, a SIM card stores the subscriber's personal information, GSM/GPRS radio settings, security keys, contacts, etc. SIM cards are installed in compatible mobile devices, enabling you to switch devices without losing personal and setup information.

SIM Card Requirements

Before installing the SIM card:

•The SIM card must be activated by the service provider.

•The terminal must be powered down.

Note: If no SIM card is installed, you can still make emergency phone calls such as 9-1-1, for example.

To Install a SIM Card

On the Dolphin 9500 terminal, access to the SIM card is located under the battery well, which enables easy access to the SIM card while securing it under an installed battery.

1.Turn off your terminal and lay it face-down on a flat surface.

2.Remove the battery pack; see To Remove the Main Battery Pack on page 2-7.

Battery Well

Battery Interface

SIM Card Door

3.Unscrew the faceplate of the SIM card door. You must use a Torx T6 wrench. You can purchase this wrench from Hand Held Products, part number 100001700.

4.Insert your SIM card. Make sure the interface on the card is connected to the SIM Card interface in the slot; the beveled corner is in the upper right corner.

9 - 2 Rev C Dolphin® 9500 Series User’s Guide